Gigabyte GN - Answered Questions & Fixed Issues

try uninstalling the wireless driver in safe mode, and reinstalling it after boot up.

What makes you think you need an antenna with 20 dB of gain to get 300m with 2.4GHz? If that's an RP-SMA connector on the card, try an (8 dBi) RE09P-RSP from l-com.com (about $40). 2 4 GHz 8 dBi Flat Patch Antenna 4ft RP SMA Plug Connector RE09P RSP

You should be able to uninstall the wireless adapter and any software that came with it. Then just install the driver and windows should take over the connection.

Hi just try this links

 

http://www.gigabyte.com/support-downloads/download-center.aspx?kw=gn-bp5401&ck=2

 

or

 

http://www.gigabyte.com/webpage/19/download-center.html

 

if any doubt replay this post

 

 

seem they are both on same frequency,try to secure your router with password should divide signal

goto there website and download the drivers

Go to this LINK. maybe a driver is needed.Also your OS is needed to find a fix.

Everything you need is HERE.

Everything you need is HERE.

plz try with the driver for vista

You can download the driver for your adapter here. Just choose the download location.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

Gameing wireless is the problem, If you like lag free gameing plug it in.

If you have no other choice but wireless, Try switching the wireless channel in your routor

With the hardware installed you also need to insure that the drivers have been installed. You will need to use the software that came with it or use windows wireless zero configuration application with your wireless router.

Hi,

Please specify the model number of the wireless router and the operating system installed on the concerned computer. Also let me know if you are able to go online wired through the router.

Reply for a quick answer.

Regards
Anand

You can download that file here:

dllinfo.dll-free-download.org/n/59344-netr61.sys.html

Hi,
The problem could be caused,as you are also missing the chip-set drivers for the motherboard. You need to download and install the chip-set drivers for the motherboard first. Then install the wireless card driver and it would solve the problem.
Sometimes the conflict is also caused, due to faulty installation of the os.
1. Remove the entries of the PCI, from the device manager. 2.Remove the wireless card from the computer.
3.Restart the computer. 4.Shut down again, 5.Put the card back in and then install it one more time.

Thanks
Proton

Thanks
Proton

The white or gray wire goes to MAIN and the black wire goes to AUX. For some reason no one can ever fully answer that question or they close the forum because it is old but when googled these questions still are valid and need to be available even today.

usb drive not format

Here is an article that should help Ad-hoc networking access point

Hi
First u attach your pendrive with pc after that u do a right click on pen drive folder ,then u click on scan option then the scan folder will apper and u select the pen drive folder by adding ,then click on next opyion and wait untill the scan is over .After scan over's then u can format your pendrive....


Thanks for using fixiya
Rupesh Kumar