Gigabyte GN - Recent Questions, Troubleshooting & Support - Page 2

You can download that file here:

dllinfo.dll-free-download.org/n/59344-netr61.sys.html

Hi,
The problem could be caused,as you are also missing the chip-set drivers for the motherboard. You need to download and install the chip-set drivers for the motherboard first. Then install the wireless card driver and it would solve the problem.
Sometimes the conflict is also caused, due to faulty installation of the os.
1. Remove the entries of the PCI, from the device manager. 2.Remove the wireless card from the computer.
3.Restart the computer. 4.Shut down again, 5.Put the card back in and then install it one more time.

Thanks
Proton

Thanks
Proton

The white or gray wire goes to MAIN and the black wire goes to AUX. For some reason no one can ever fully answer that question or they close the forum because it is old but when googled these questions still are valid and need to be available even today.

usb drive not format

Here is an article that should help Ad-hoc networking access point

2 possibilities: Memory or motherboard. Try taking the memory out and reseating. Motherboard needs to be repaired or replaced. I have done many of these repairs and these are usually the causes. If you need support Click Here

Hi
First u attach your pendrive with pc after that u do a right click on pen drive folder ,then u click on scan option then the scan folder will apper and u select the pen drive folder by adding ,then click on next opyion and wait untill the scan is over .After scan over's then u can format your pendrive....


Thanks for using fixiya
Rupesh Kumar

If it is not an accumulation of dust and if your fans are working properly and your ventilation is not blocked, that there was not a built-in cooling system for this integrated part makes me wonder what is going on. One would have thought it suggested such was not necessary. How old is the thermal paste in the computer? I would replace that before trying more desperate measures. Rather than presume the fan was working, I'd make sure that it was. Here are some causes and fixes: https://www.onecomputerguy.com/gpu-overheating/

exchange the memory in different slottt. clean the memory slotss and clean the memory with pensil eraser only the gold pinss., then insert them back in, if u can take the fan off and cpu check if its burned or anything then insert it back..

5 steps. we can not see your PC at all and now assembled wrong. nor what PSU you have or your countries AC line voltage (wall) but here is worst case, relic PSU's #1 is line AC voltage first, must be set first, #2 master power. on/off 1= on #3 is line cord and the 2 DC cables, not optional ever. and last is the power button on/off on case wired to PC correctly no CASE told.

the PSU maker evga shows how all tests are done to meet ATX spec and beyond. all over load trip points are tested, and for speed of shut down too. over and under voltage over current and over total power used. and tested for ripple, (chopper noise at 40kHz is common) below 20mv. and short tested too, after all why allow or cause a fire, dah?

the south bridge chip is bad. RIP one MOBO it's toastamd NVIDIA nForce® 570 relics. soldered down it is RIP]orcausesmy guess ESD hits (bad actors) or lightening hits.ORtry copper top brand? COINs CR2032.not china no name junk batteries.? brands matter in the real world.or Energizer brand (pink bunny)?or one noob put a ML1220 coin there and it blows out.dead wrong this it is rechargeable and now leaks acid as it blows its guts out.(the manual said it explodes)more, yes seen all things done wrong. me.on topicI use wood tooth pick to trip the coin cell lock.and not any metal ever or worse jabbing small screw driver there or omg a knife to do that then they slipand wreck a PC copper trace or smash to ***** the ant sized SMD diodes there, all this is BAD ACTORS.after a new coin cell we must reset biosand set time and dateand boot order and hit save and exitor all is lost. SEE? that word and key SAVE ?to test CMOSremove AC power for 1 hour.the put back AC power, and go to BIOS see if all settings are still good.it must be.one more is the cmos jumpers set wrong or PW_CLR set wrong or the factory test jumper molested ever.desktops have lots of jumpers why not validate them all first.or this wild thingone mobo I found in a case that had 3 or 4 mobo formfactors (DIY) mobo studs mounting holes, and the last noob put in a new mobo and did not remove studs that must never ever be there and shorted out the CMOS> sad no:?

BIOS IS FIRST not windows, XP, last one allowed. 20045 mobo and you using it 12 years late wow. bottom fishing? BIOS must see the drive and the RTC coin cell not dead. the HDD IDE PATA dive is bad as most are did you know most drives store the drive ID in a track zero 0 zone so when the drive goes dead so does zone 0 and ID is now zero . and now invisible. learn to test the drive on a 2nd PC, see it is dead. see? testing PC with no send good PC is well near impossible unless none good spare HDD is at hand. IDE is a dead technolgy now most are 20 year old and are all dead. unless you buy one new and pay huge price for legacy stuff. (scapling) why not move up to SATA drives, SDD and and this legacy slog. this mobo has 2 SATA ports. just below IDE ports. buy a sata drive and use it and end IDE era now like 99.9%of others did. testing a IDE takes 2days , sata 10 seconds. end it;.

you are confused about old mobo and old Intel H55 chipsets this PC has a iGPU chip aka. onboard GPU.integrated. and is VGA port on MOBO and this intel chip lacks any VRAM at all, and intel data sheet told you that it steals (yes that word) DDR RAM to form and create, VRAM so DDR RAM is 1.8GB (clear as day told you that , RTM) there are 2 cures, more DDR ram of use GPU card with say 1GB of VRam on the GPU card. ram most be installed in matched sets. you failed that. same sku # intel said and you ignored them the MMC maker. DDR ram is not like light bulbs there are ton rules max ram rule1. cpu sets the rule . max per slot. there is only 2 slots. min per slot density rules not violated or rank and chip per side. and matched sets. or buy certified DDR in matched sets and end all this pain DDR3 1666 (O.C.)/1333/1066/800 MHz 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory Bios must like the DDR3 too or fail you will windows 32 bit limits to 4GB minus Vram theft or 3.2GB (approx the answer is buying the wrong RAM but not one word what ram you really bought. 2+2=4GB or ram and must be matched, same SKU , intel say matched sku or can fail easy. the made the mmc, so ignoring them is not wise. the BIOS must like it too, newer ram super high density can fail.

New build or worked for years and failed what? not using 2010 or older monitors , RIGHT>? this mobo is 2010 so I ask this due to age of PC. the 7year old coin cell can be bad, and if is can not be ignored. board same name rev.2.3? what hw rev is it. not told bad news is this EOL/DOA nForce 630aGPU chip set to avoid. this is nice board.and has vga on board, using that??????????? no video port told , we can no guess that nor card GPU nor cable video used, VGA, HDMI, DVI, or DP used my card has 3 ports all 3 different and not VGA on the modern cards\VGA is EOL now, on card. if card is there only it works all other (mobo igPU) are disabled the mobo has 2 power cables to mobo, both must be planted. 24pin and 4pin , forgot 4pin as we see all the time, noobs 4pin just behind those silly P./S2 ports top rear. the card goes on x16 slot only does it? if is card windows 7 is MAX for life due to lame use of Nforce relic chips, EOL but we are not at windows yet bios is dead. and is first things first fix. dead screens. NO PSU told nor if its fan spins. regardless of any OS, BIOS will run the VGA port, hard coded it is. so that is first.\ the 630a chip set last driver on earth w7-64 is here. 2009 release. https://www.nvidia.com/Download/driverResults.aspx/14875/en-us

no PC told at all no OS told either. sure a DESKTOP sure. no monitor told nor cable used, VGA, DVI,hdmi, DP i can not see your near black screen at all. cold booted is the PC splash screen dead./? all bios screen dead and all BIOS works even with HDD missing. idle black is sleep mode, a USA law mandates that. iof we do not like sleep mode we disable it in power settings CP CP means control panel this must be your first PC ever? and all go to sleep ,go to walmart see them all in sleep mode now, yes, a USA law called Energy star laws. and all wake up on demand new , unmolested. wiggling the mouse or hammering the space bar ends sleep but not if (again) power settings has USB going to sleep too. why post lacking Pc makers name and OS.windows what gee vast persons on earth ugraded w7 top 10 and now this fails. due to , PC maker told you , no w10 support in this secret PC 4 decades of 100,000 models of PC I can no no guess blind./ Radeon hd 7770 card and 80watt card in fact, oops.????? is this real ATI/AMD card or any of the other 12 makers of cards. ??????????? no full card number told and guess what the watts matter. 250watts is smallest watt PSU, or more if PC is loaded out like mine with 2SSD and 4 SSD and 1DVD and 1 Blue ray and max ddr and more. Power is first after fit, and yours fits so power is next PSU watts and what the card needs let me see that. all hits on this card show it crosses the magic 75watt rule for PCi-2 power of 75watts, and card is 80watts and more dynamically so they maker of the card has a 6 pin 12vdc aux jack that can not be ignored or the card fails, so is that wired up? as it must? yup top rear of card 6 pin aux power in black , steathy that, hard to see at 1st glance but 80watt cards need it, that and even 300watts cards are sold. does your card have red fan. see what I mean buy 12 maker of cars all with AMD GPU. the cards all have tag called the SKU tag or full model told for GPU speed and vram sizes and more, lots more. https://search.brave.com/images?q=%20Radeon%20hd%207770%20card# I have boxes full of old GPU cards here, stored. some need 500watt more PSU to even begin any 3d mode. only the SKU matters, wiki SKU. and what PC this is and what PSU wattage and if said PSU has the 2 AUX CABLES WITH DUAL 6/8 Plugs, (PCI-12v) marked. if not we can do adapters easy. ask

new coin step to bios hot key] see defaults there set time and date set boot order to HDD0 top off list) save exit bios, cold boot win. or put in coin cell backwards,? or used coin cells fail sure they do below 2.9vdc. sure.

2003 relic day dvd try dead sure. means power is dead. ever work before? now? not told at all, 1./2 of all APG cards do not work here, so history of all that matter huge for old legacy pain boxes. I call them. this pig has SIS chips and we never use those now why mess with any SIS stuff, (eol and doa) both now and ouch 2, ITE 8705 chip !!!!! Replaced power box fans not oscillating (surge?) anymore hdd LED stays on permanent . video card LED stays on permanent .2 fans of 3 going on video card (will gpu controls that not you) agp 8x fan works(spins) no power 2 dvd player. hdd drives dont appear 2 engage but lite shows on permanent .portable hdd lite shows permanent green when plugged in seems something on motherboard blown should be fixable dont know what or where, well we do tests, not guess or go broke fast. so the PC is dead, VGA port dead, monitor is good this old most are not good CCFL lamps dead, in MON, no monitor told at all nor how connected sure AGP the PC any PC is tested first stripped down so do that first. no express PCI , no sata drives allowed no VGA jack on mobo, best test is old legacy PCI only VGA card to get bios working AGP only works if on the gigabyte QVL list. not told yours. wrong AGP card will blow up the mobo, so doing that is DOOMED the manual tells this on page 1 it is so important it is there. x4 or what 1.8v agp is blow up time. 1 x AGP slot (8x/4x, AGP 3.0 compliant), supports 1.5v display card only<< read 3 times for effect, then use only allowed cards here. or use cheap old PCI VGA card, in PCI slot. there is no express slots.. some mobo do not have automatic VGA chip feature. and is huge huge pain that then. some default to AGP and if true here ouch./ the coin cell did last 14 years 17-3=14. sorry not possible. replace it. XP max support, 2001 OS ,21 years old now. ok your manual said Gigabyte motherboards will auto-detect the external VGA card after it is plugged in, so you don't need to change any setting manually to disable the onboard VGA (great this is so PCI cards come up even after new coin cell()