General Washing Machines - Page 8 - Recent Questions, Troubleshooting & Support

E31 is for a slow drain. If the filter and pump are clear of any debris you will need to replace the pump. Here is the part to order.Keep me posted!

All parts come with a 365 day, any part, any reason return policy.

No. There is only one drain trap. If you're still having issues with it draining, with the washer unplugged spin the impeller on the drain pump by hand. if it turns with a hard bounce its okay, and you may have to feel the hose that sits on the bottom of the washer that goes to the drainpump for any kind of debres in there.

Check your 2 in 3 out water valve part# WH13X10029, this responsible for filling of water. By the way wash cycle will not run, until washer sense enough water.

Remove the 3 screws from the lower kick-plate and run a load to see if you can find where the leak is coming from.

Please check this link for tips to change the bearing and have a check on the drive shaft.click on : bearing changing.

Hi,
When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about the noise and vibration that front loadwashers can make..

Washer Problems Washer noise when spinning
heatman101