General Washing Machines - Page 2 - Recent Questions, Troubleshooting & Support

That could be your trouble the washer has adjustable legs turn legs to adjust level. Also check the belt for worn out.

the fact is that no manufacturer will give you part nos ion safety and legal reasons the only way is to go to a scap yard and y=try to find the same scrap machine for the circuit board, the value of the resistors is irrelevant as they burnt out for a reason that replacement resistors wont fix eric

when you let people know what type of machine it is then maybe we could help but go to the manufactures and download the user manual and check in the trouble shooting guide eric

hi if you are familiar on how to use an electric multimeter this is what you do access to the motor which does the washing / spinning find the cable that are attached to the motor remove cables screw them on to a separated connecting block now you select a program ( awash ) with no laundry start the program then set you meter to volts hold the meter prongs on the cable that you have already put into the block hold firm the prongs in each wire you then should get voltage ( hold for 5/8 minutes if the voltage do not get interrupted there is nothing wrong with the control board but the motor is faulty and vice versa

You can download GE owner's manuals here. You can GE order parts and accessories here.

Pump sensor stuck...
Check for clog by removing back and take drain hose off