Gem Sound Food Mixers - Recent Questions, Troubleshooting & Support

try this manual it's the same all in one mixer - http://www.geminidj.com/product_manuals/CDM-500_om_12_7_2005_small.pdf

type and number should be on fuse

You may have a faulty capacitor that is an electrical problem not allowing a signal for the tray to open. Sometimes they track can stick as well.
One thing you can do is stick a paper clip in the middle of the tray, slowly pull it open, then pull it back as far as it will allow you, then press eject and it usually will re-align itself back on track and work again.

Sounds like a ground problem. Try to hook a ground strap or wire from the case of the computers power supply to the ground of the mixer. If it still has noise, try to touch the ground to the bracket of the computers sound card. Most likely, the computer uses a three prong adaptor and the mixer does not. Outlet grounds have voltages which bleed off from motors and other devices, which could cause the 60hz noise. If your mixer has a three prong plug do not plug your computer and mixer in separate outlets with separate grounds or you could fry your system. If you still have problems use a three to two prong adaptor and attach an isolated ground wire on the adaptor for the computer.

hi My name is Jonathan but I'm DJ's that's means that When you put it an cd's on your Gemsound CD tray that is mean that it's won't played it error cd's it's might be scratch or damage and you need to ask me more about that here's the my email addresses is [email protected]

use the serato mix live dj software

This is what I did to get a copy, I went on different store sites that sold this product and I found that some will advertise the product, it's functions and its instruction manual. When you find it just copy and paste the page.

JLofton(2Housepeople)

Here is the website for Gemsound:
http://www.gemsound.com/products_cdplayers_cdm150.html