GE Cooktops - Page 7 - Recent Questions, Troubleshooting & Support

I have a I just bought a General Electric stove and everytime I cook everything is burnt in my oven what could be wrong its an oldie

Yes

Check if your cookware is compatible with this ceramic cooktop.

I am going to assume you hear the "clicking" sound when you try to light the burner.
open the top of the stove. there are four burner. look at the one that is not lighting. use a straighten paper clip open the holes that is directly in-front of the tube that is facing the center of ignitor.
also make sure that the air vent directly behind the knob is fully open.

These white wires could be a thermistor which is a type of heat sensor, if you damage it you have no safety cutout or automatic reset.

You probably have button or a knob to press to get ignition if there is a bit of gunk stuck in there it will not come out again, you need to remove the knob and clean out whatever is in there.

Have you had a spill in the oven that could have blocked the bottom burner and baked on hard?

First, check the filter and make sure it isn't clogged. Second, check the water line and more importantly, the valve that feeds the water to the fridge. It should be 1/4'' line and usually has a saddle valve installed off another larger cold water line. Saddle valves have a tendency to rust and clog. these are simple fixes, generally. IF all these check out OK, Check the water valve inside of the fridge, where water line comes in..Hope this solves your problem.Good luck DW