Garmin GPS - Recent Questions, Troubleshooting & Support


check garmin website

Garmin GPS | Answered Yesterday


I can help you reset and fix your Garmin Nuvi 265W.

Getting stuck on the flashing Garmin logo, or a message about not finding any maps, are indications that the firmware / system software inside your GPS has been corrupted. Don't skip the hard reset step (or the backup step!)

There are three steps to take to get your Nuvi 265W running like new:

  1. Back up your Favorites.
  2. Perform a Hard Reset.
  3. Download and then run Garmin WebUpdater to replace its firmware / system software.

I hope that helps.
_____________________________
Nuvi 265W Manuals here.

Garmin nuvi 350... | Answered Yesterday


Guys and or ladies... I know that you have to create a folder named "GARMIN" in the sd card so the maps can be recognize. Maybe this solves your problem. Let me know if it works.
BR from Spain,
Carla

Garmin Nuvi 660... | Answered on Jan 10, 2020


It's strange if the plug doesn't fit the cigarette lighter socket. They can be a tight fit so if you find it a little big for the socket try putting pressure on it to push it in. If it absolutely won't fit you can buy cigarette lighter plugs in car accessory shops. If you can get one that does fit you can cut the one that's on the lead off and fit the new one.

If you cannot get any plug to fit you can get the lead wired permanently into the car. Any garage would be able to do it for you.

Garmin Nuvi 660... | Answered on Jan 08, 2020


Garmin Fishfinder 140 How to reset sonar failure?

Garmin... | Answered on Jan 08, 2020


try www.garmin.com

Garmin GPS | Answered on Jan 07, 2020


Hi,
it looks like there's a glitch in the software. Try pressing and holding the on/off button for at least 10 seconds.

Garmin GPS | Answered on Dec 23, 2019


Hi,
it looks like your GPS has somehow reset to the marine locating function.
did you check the settings and go thru all the choices that may have been modified ?

Garmin GPS | Answered on Dec 23, 2019


does not look like it to me web address shows fixya

Garmin GPS | Answered on Dec 20, 2019


Go to the garmin web site and update your GPS.

Garmin GPS | Answered on Dec 13, 2019


PDF]Garmin Drive™ 40/50/60 - CNET Content Solutions cdn.cnetcontent.com/3e/d4/3ed4aeb7-d7f3-4ded-ab78-4c0cfb4525b1.pdf ... and to make changes in the content of this manual without obligation to notify any person or organization of such ... Garmin Drive 60 Device Overview.

Garmin Drive™ 60LM ' Garmin

https://buy.garmin.com/en-CA/CA/p/523227
  1. Cached
Garmin Drive is a 6-inch GPS navigator preloaded with lifetime maps of the U.S. or U.S. and Canada, plus new driver alerts to encourage safer driving. Find out ...

Garmin Drive™ 60LMT ' Garmin

https://buy.garmin.com/en-CA/CA/p/523327
  1. Cached
Garmin Drive is a 6-inch GPS navigator preloaded with lifetime maps of the U.S. or U.S. and Canada, plus new driver alerts to encourage safer driving. Find out ...

[PDF]Garmin DriveSmart™ 50/60/70

static.garmin.com/pumac/DriveSmart_50-60-70_OM_EN.pdf Owner's Manual ... Garmin DriveSmart 60 Device Overview. ... Driver Awareness Features and Alerts........................ 3. Enabling or Disabling Audible Driver Alerts.

Garmin Drive 60 Manuals

https://www.manualslib.com > Brands > Garmin Manuals > GPS
  1. Cached
Garmin Drive 60 Pdf User Manuals. View online or download Garmin Drive 60 Owner's Manual. manual for Garmin Drive 60 Google Search

Garmin GPS | Answered on Dec 12, 2019


If the echo series device powers on in demo mode (sometimes called simulator mode), this is an indication that the device does not recognize that a transducer is connected upon power up.
Ensure the transducer was correctly connected before powering on the echo. If the echo was powered on before the transducer was connected, power the echo off, then back on.
If the echo has a 5-inch display and is still in demo mode, an additional check can be made:
  1. Disconnect all cables from the back of the echo
  2. Completely remove the echo from the mount and the back mounting plate
  3. Correctly line up and connect the transducer cable to the echo's transducer port
  4. Once the transducer cable has been connected, connect the power cable to the echo's power cable port
  5. Power on the echo

Garmin GPS | Answered on Dec 05, 2019


try garmins website

Garmin GPS | Answered on Nov 22, 2019


Very easy to fix the problem. When you plug in the Garmin Nuvi 200 to your computer, two drives will show up . Go to the Garmin drive and click on voice file, delete all the languages except for the one you want to use (i.e. American USA), this will give you all the 37 Megs you need to download 2009 maps. Takes a while to download using the web updater that you need to download into your computer from Garmin, but I had no problems.

Garmin nuvi 200W... | Answered on Nov 18, 2019


To reset the unit, pry off the silver faceplate.
Turn the unit on using the power button on the right side.
Press the reset button that was hidden behind the face plate.
The GPS unit should restart, and display its software version.
Make a note of the software version in case you have to call customer service.
To acquire satellites make sure the GPS has a clear view of the sky.

For Garmin customer service, call 800-800-1020.
You can also go to this link for complete customer service info:
Garmin Customer Service

Good luck, please rate this response favorably.

Garmin... | Answered on Nov 18, 2019

Not finding what you are looking for?
Garmin Logo

20,532 questions posted

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

John Egan
John Egan

Level 2 Expert

85 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...