GARDENA Hardware & Accessories - Recent Questions, Troubleshooting & Support

manufacturer for that type of information

GARDENA Hardware... | Answered on Jul 13, 2019

Contact Gardena direct

Spare parts - Gardena > Canada (en) > Service and Support > Spare parts

All parts are precision-manufactured to maintain the value of your GARDENA tools and extend their life cycle. GARDENA spare parts include specific moulded components, mechanical, electrical and electronic components all manufactured to the highest standards to withstand the wear ...

GARDENA Hardware... | Answered on May 28, 2019

Verve water timers might be Melnor:
Open following link for manuals.
Links to other water timer manufactures and manuals are found on following link:

GARDENA Water... | Answered on Apr 01, 2019

To access the Gardena T120 diaphragm remove the oval cover at back with small flat screwdrivers to reveal the round retaining cover. The retaining cover unscrews to reveal the diaphram mechanism which can be removed and cleaned. Hopefully this solves the problem.
Dirt or sludge in here cause the timer to stay on or leak.
Stage 2 if the above fails.
Remove the front timer cover with very large flat screwdriver. Simply lever off the front timer cover. This is a brute strength operation. There is no tab or button to help remove the front. Insects and dirt can get in and stop the operation of the needle mechanism.
Stage 3
I do not know how to get to the mechanical timer itself. Any suggestions?


GARDENA Water... | Answered on Feb 24, 2018

Gardena Water Controls Water Computer 1060

You may need new cable harness. part number 33. use first instruction download.

GARDENA Hardware... | Answered on Oct 29, 2017

it is set for the number of minutes it will allow water through
turn it clockwise and the number you set it on is the number of minutes it is on
if you want a manual then go google and type in gardens t 13 water timer--- and in gardens .com site you will find a section manuals and documentation--instruction manuals

GARDENA Hardware... | Answered on Jun 12, 2016

for the Gardena-T-1030-1805 model....
Gardena 1030 1805 Operating Instructions Manual Page 7

11. Battery
11.1 Status indicator
If the battery capacity falls below a certain level, a warning signal sounds every 15 seconds. The programs you have set are not run. The water flow cannot be opened manually. If a valve is open, however, it will be closed.
11.2 Changing the battery
If the battery capacity is too low (the warning signal beeps every 15 seconds), you must change the battery.

To do this, the water timer must be removed from the tap.
Important : Changing the battery deletes the data you have set.
To change the battery :
1. Insert the battery in the battery compartment
2. Set the Run Time control knob
3. Reset the watering data as described in "Setting the watering data".
3 If the Run Time knob is not turned to Reset, 5 seconds after the
battery was inserted the current Run Time shall be accepted. This is confirmed by a double beep.

Note : The time the battery was changed is taken to be the starting time.

To ensure that the water timer works properly we recommend that you insert a new battery at the beginning of every gardening season, or at the latest after a year.
Important ! Please dispose of used batteries properly at the appropriate communal waste disposal site. Only dispose of batteries when flat.

GARDENA Hardware... | Answered on May 28, 2016

Not finding what you are looking for?

166 questions posted

Ask a Question

Usually answered in minutes!

Top GARDENA Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5391 Answers

Charles Tidwell

Level 3 Expert

475 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30365 Answers

Are you a GARDENA Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides