Fuji FinePix - Popular Questions, Answers, Tips & Manuals

2003 made (first one) is 20 years old. the batteries are NO GOOD this sold period so buy batteries and charge them. sold mine 19 years ago free manual is here https://www.manualsbase.com/manual/download/113285/ The 2HR-3UF includes 2 pieces of high-capacity AA-size Ni-MH (nickel-metal hydride) batteries. read page 119 oddly the 5vdc power pack with camera does not charge this battery set x4 only standalong battery chargers work seen on page 116 BK-NH2 or generic.

The CCD is bad, or the connector.

Many occasions LCD on camera display never fails but back light fails unless physical damage to LCD screen. Hold a torch to display when camera is on you will see faint(black and white) image means LCD is ok but back light is failed, it's replaceable but needs little skill to replace. Or replace full Screen with backlight. This is easy. Just remove back cover, remove display by loosening flex lock, put back new display carefully lock it holding flex with one finger. Please do not touch display flex contacts.

This question is too old; however, assuming someone with similar question can be informed of the same. Most cameras (brand/model) will require an associate software for use in tether mode. For Fuji, it would be Fuji Camera Remote application - Fuji-hyper Utility software, Canon EOS - the EOS Utility etc. Without the software, your camera becomes a SD card holder when it is connected to a computer. You can't do anything with it. (There are exceptions though - for instance, a Sony Cyber shot DSC W30/ W40 future a AV out jack that can project AV on the computer or TV)

Try googling fo r the info...they have a huge range of details for just this sort of problem. If not, tryto access memory operation thtough your unit's memory - there should be a trigger giving initialization details. Hope this helps!

Have you got it set to macro ?

http://www.fujifilm.com/support/digital_cameras/software/finepix_viewer/ver55win/download.html

Here you go... Support and Contact Center

Screenshot or more details needed. This sounds like camera is faulty, but i dont want to believe it. Are we talking about web cam or like photo camera? If web cam, then just get new one from ebay, no point to have headache when they are so cheap on ebay. But if we are talking about photo camera then make sure you have right drivers installed, all usb settings are correct on cam. I mean, some devices are charging via usb and wont let you take photos unless you change usb setting to media transfer mode. Check those. But if photocam does a photoshot but image is blank then you might have a faulty photo cam

Try removing the batteries and re-install to reboot the chip. If still same problem more than likely an internal part has failed. Most cameras cost more to fix than they are worth. Suggest in that case to upgrade to a newer model.

You might as well replace the camera in this case.

The lens probably has some dirt or pocket fuzz caught in it. Try spraying around it with a can of compressed air when it is extended. Also spray the lens.

It often helps to specify the make and model If it has a separate button battery that stores the settings, replacing it should solve your problem otherwise try replacing your batteries

take the memory card out camera and plug it into lappy

I had a Finepix camera and on it was a feature for image stabilising. On the display it showed a hand. Have a look for it on the menu

Can you just pull out the memory card and using a memory card reader input the data into the PC?

Format the card in the camera

armanhotarman

What did you do or what changes did you make to your computer since all operated fine? Bad things just do not happen - you must have done something that is now responsible for the issue. Can you repair your Vista installation - your OS may be at issue. If you have other computer with Vista try installing there to see if it works. Maybe something is now wrong with the camera - it happens.