Fisher and Paykel Washing Machines - Page 8 - Recent Questions, Troubleshooting & Support


do you mean fuse ? if so its on the main computer board

Fisher and... | Answered on Apr 21, 2018


as this fault doesnt exist i would say the main board is faulty

Fisher and... | Answered on Apr 21, 2018


easy as remove cap off the top of the agitator,inside at the bottom there is aa wing nut undo anticlosewise and remove agitator

Fisher and... | Answered on Apr 21, 2018


its one of tricky ones,because its one of two faults, both are board faults question is which one so you need two replce and try it if tht doent work replace the other one

Fisher and... | Answered on Apr 21, 2018


this is a fault code 43 which mean the out of balance switch is either faulty or the switch isstuck in the on positionfree up or replace switch which is located just under the main board

Fisher and... | Answered on Apr 21, 2018


top loader yes remove cap off top of agitator there is a plastic wing nut at the bottom undo anticlockwise and agitator canbe removed and replacement

Fisher and... | Answered on Apr 21, 2018


the is actuallt a special spanner for it which is now unavailable

Fisher and... | Answered on Apr 21, 2018


you have a faulty pump do not use until you replace it

Fisher and... | Answered on Apr 21, 2018


faulty cold water solenoid is the most likely fault

Fisher and... | Answered on Apr 21, 2018


remove bowl and clean them both

Fisher and... | Answered on Apr 21, 2018


solenoid seal has gone replace solenoid

Fisher and... | Answered on Apr 21, 2018


it goes out the drain hose,there is one you can buy as an extra

Fisher and... | Answered on Apr 21, 2018


needs to know what lights are flashing before i can help you

Fisher and... | Answered on Apr 21, 2018


most likely a faulty lid lock unit

Fisher and... | Answered on Apr 21, 2018


bearins and seal can be replaced

Fisher and... | Answered on Apr 21, 2018


its to help the machine from going out of balance on the spin

Fisher and... | Answered on Apr 21, 2018


this is either a faulty sensor or main board

Fisher and... | Answered on Apr 21, 2018


to prevent the hose from being kinked

Fisher and... | Answered on Apr 21, 2018

Not finding what you are looking for?
Fisher and Paykel Logo

4,179 questions posted

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...