Filter Heating & Cooling - Recent Questions, Troubleshooting & Support
Our furnace keeps shutting off. I'm having to manually turn the thermostat back on. New filter and batteries have been put in!
If your furnace is shutting off and you are having to manually turn the thermostat back on, there could be a few different issues causing the problem. Here are a few things you can try to troubleshoot the issue:
- Check the thermostat settings: Make sure the thermostat is set to the correct temperature and that the furnace is set to "heat" mode.
- Check for a clogged air filter: A clogged air filter can restrict the airflow to the furnace, causing it to shut off. If you have recently replaced the air filter and the problem persists, try cleaning or replacing the filter again to see if that resolves the issue.
- Check the furnace's limit switch: The limit switch is a safety device that shuts off the furnace if it becomes too hot. If the limit switch is malfunctioning, it can cause the furnace to shut off. You can try resetting the limit switch by turning the furnace off and then back on again.
- Check for any visible issues: Inspect the furnace and its components for any visible issues that may be causing the furnace to shut off. This can include debris or foreign objects that may have gotten stuck in the furnace, or damage to the furnace or its components.
If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the furnace serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs.
York furnace blower running slow
There could be a few different issues causing the blower on your York furnace to run at low speed all the time. Here are a few things you can try to troubleshoot the issue:
Check the thermostat: Make sure the thermostat is set to the correct temperature and is functioning properly. If the thermostat is not working properly, it could cause the blower to run at low speed all the time.
Check the blower motor: Make sure the blower motor is not damaged and is running smoothly. You can try cleaning the motor and checking for any visible signs of damage.
Check the blower relay: The blower relay is a switch that controls the blower motor. Make sure the relay is functioning properly and not stuck in the "on" position.
Check the control board: If the thermostat, blower motor, and blower relay are all in good condition, the problem may be with the control board. You can try resetting the control board by unplugging the furnace and waiting a few minutes before plugging it back in.
If these steps do not resolve the issue, you may need to take the furnace to a professional HVAC technician for further evaluation and repair. They will be able to diagnose the problem and recommend the necessary repairs.
Heat and air not working on new home.
Hi,
please check the vents in the rooms that are not cooling well. There might be a hole/leak in your heating system. The thermostat itself might not be the problem. If possible, please research google nest to check if it has multiple thermostats that can be used to more accurately state the average temperature across several rooms of your home.
You might need to get an hvac diagnostic to find and plug all of the leaks in your home before deciding to alter any of your heating system.
Thank you.
How clean my air filter on my deshumidifier ?
There should be a washable pull out filter in the front or back of the unit. Clean with warm water a little dish soap. Rinse and dry and reinstall. You should do this once a month.
Not finding what you are looking for?
