Evenflo Baby Gear - Page 9 - Recent Questions, Troubleshooting & Support

That is a recalled Crib. The drop sides may give out and cause a baby rolling over to become entrapped in the partially let down drop side.

copy paste this link to get a manual for this unit .
The PDF manual is available at : https://plweb.evenflo.com/ShowDocument.aspx?Manual ID=319
hope this helps.

Hi, I found the Evenflo 9021 manual here for download, this should list where you can get replacement parts

I need instructions to asseble jenny lind crib #012614

Need complete discription of missing parts. I may have them.
babycribdoctor.com

Try eBay I've seen all sorts of parts show up there.

you need to turn the car seat over and on the very bottom there are two gold rectangle-shaped clips holding the straps. You can pop these out and feed them through the hole....not like other car seats where the straps unattach up at the shoulder end.

model # 0161615 i need setup instructions

You CAN remove the armrests- quite easily actually! All you need to do is grab a small pair of pliers. Behind each armrest are two tabs. With the pliers, pull the bottom tab out. Slide the top tab underneath the bottom. The armrest will pop right off! Which means you can wash the pad seat and all!

Hi.

Please copy and paste the link below in your browser bar to download the manual. Choose save as when asked.

https://plweb.evenflo.com/ShowDocument.aspx?ManualID=498



See also this tip: How to Assemble ... eHow.co


See also: Evenflo

Regards.

Ginko.

hi
please fill the info in this link maybe they have manual to help


https://plweb.evenflo.com/replacement_parts.aspx

hi contact evenflo they will probably be able to help

details are here http://www.evenflo.com/corporate.aspx?id=175

here is a link to a list of evenflo recalls
it doesn't look like the titan is on the list
http://safety.evenflo.com/cs/sc/cssc_RD.phtml

hi
try this how to

http://www.ehow.com/how_4761504_assemble-jenny-lind-crib.html

hi
here is a list of recalls
http://safety.evenflo.com/cs/sc/cssc99_RD.phtml?rid=EFR29&src=WEB

This is the web page to order parts and manuals from Evenflo. You will need the Model # and Date of Manufacture. plweb.evenflo.com/replacement_parts.aspx

Here is the link for order replacement parts for Evenflo car seats; you need to enter the model and date of manufacture all written on the seats label. Try ithttps://plweb.evenflo.com/replacement_parts.aspx

Evenflo - ExersaucerInstructions:
- evenflo.com/ShowDocument.aspx?ManualID=234
- evenflo.com/resource.aspx?id=467&rcid=19

I hopw helps with this; remember to rate this answer. Good luck.

Products America have complete hardware kits. There are several hardware configuration options to consider before starting your crib building project. Please call for assistance (800)205-9642 or (800)772-1041 for direct assistance or check out our kit page!

I hope this helps (remember to rate and comment this answer).

Sounds like it somehow got overloaded. Did anyone step on them? Single strollers are typically tested to hold up to 100 pounds, which is well above the weight of a child and their gear. Regardless of what happened, contact Evenflo directy and see if they will replace the rear axle and wheels. You can't by replacment wheels at any store.