Epson Photo - Recent Questions, Troubleshooting & Support

A "general error" with two red lights blinking on an Epson T60 printer can be caused by various issues, such as a paper jam, a foreign object inside the printer, a problem with the ink cartridges, or a malfunctioning of the printer mechanism. To troubleshoot this issue, try the following steps:

1. Turn off the printer and unplug it from the power source.
2. Check for any paper jams or foreign objects inside the printer and remove them if found.
3. Ensure that the ink cartridges are installed properly and have enough ink.
4. Check if any of the cartridges are damaged or expired and replace them if necessary.
5. Clean the print head using the printer software utility or manually.
6. Check the printer mechanism for any damages or obstructions and remove them if found.
7. Turn on the printer and check if the error persists.

If the issue persists, you may need to contact Epson customer support or a certified technician for further assistance.

Error 1433 means "IS Unit position sensor error". unfortunately this issue is a major one and will need to be repaired by an Epson technician.

# Select Print from the File menu.

If you see the message The Epson Printer Driver dealing with CD printing is not installed, click OK.

# Click Tray, select Tray 2, then click OK.

Note: If Tray 2 is not selected, the CD design will print in the wrong position.

# Click Manual Print.

# Make sure Epson Stylus Photo R(your model) is selected.

# Under Paper, select the following settings:

* Source: Manual

* Size: A4

# Click Properties.

# Select CD/DVD or CD/DVD Premium Surface for the Media Type setting.

# Click OK, then click OK again to print.

Use Epson Photo Paper, and set your printer to "best" quality. I could help you better if you would: 1. give model of printer 2. tell me what paper you're using 3. what the problem is with your photos.

you all needs to be as a user of this site and get every solution.......... https://99trickss.com

Hi Rashid, Step 1 Uninstall the driver that you have installed recently. Open Devices and Printers by clicking theStartbutton, and then, on the Start menu, clickingDevices and Printers. Right click the printer-> Click on Properties-> click theDrivertab, and then clickUninstall. Follow the instructions. Now download the drivers from the following link and install it and check if it helps. http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Stylus-SX425W/Drivers-Support Install the driver and check if it helps. Step 2 Try the Printer troubleshooter, which will attempt to automatically diagnose and fix your problem. Open the Printer troubleshooter by clicking the Start button, and then clicking Control Panel. In the search box, type troubleshooter, and then click Troubleshooting. Under Hardware and Sound, clickUse a printer. Next, try updating the printer driver on your computer. Printer problems sometimes stem from out-of-date driver software, and can be solved by installing-or reinstalling-the latest driver. Hope It's resolve all Your Printer Problem, Or Still having Problem Then follow Us For Epson Printer Support

Check the ink catridges and also the connection. Usually it is something that is not connected or alligned

in printer setting there may be a cartridge detect tab try it.

Part are end life cycle : waste ink pad full. Need to reset waste ink counter. SSc ver 4.3 support RX 620 and 640. U can try using printer model RX 640. Menu Protection Counter, Show current value for checking. Reset protection counter. Or Try to find RX630 adjusment at indoreset,blogspot.com. Don't forget to replace or wash the pad. Or extend outlet waste ink pipe to outside.

hi if you are face any epson printer related problem you can viit our site. https://www.epsonprintersupport247.com/how-to-fix-epson-printer-error-code-0xea/

Please try this procedure one more time using the instructions below.

1. Turn the printer off, and disconnect the interface cable.
2. Turn the printer back on.
3. If the error lights disappear, turn the printer off and reconnect the interface cable. Turn the printer back on and try printing again.
4. If the error lights continue, unplug the printer power cord for a few seconds and reconnect it to a different power outlet.
5. If the printer is plugged into a power strip or surge protector, try plugging it directly into the outlet.

Note: Also check that the ink cartridges and lids are pushed down fully. If the problem persists, an unknown printer error has occurred. The printer may require service.

you need to reset waste ink pad counter by adjustment program for epson t50 t60 printers

http://esupport.epson-europe.com/ProductHome.aspx?lng=en-GB&data=YZnBT5wk60YR4zWUxGANfgIoGj5U0I8I
here u can download...

Hi, My English is not good, but i have problem how to download the Driver Epson T60 Model b412b. thank you !

. Click the Start button on the Windows taskbar and then click Control Panel on the right side of the Start menu. 2. Click the Printers and Other Hardware hyperlink if the Control Panel window is in Category View.
Otherwise, double-click the Printers and Faxes icon if the Control Panel window is in Classic View.
3. Click the Add a Printer hyperlink in the Printers and Other Hardware window to start the Add Printer Wizard and then click the Next button, or press Enter to advance to the Local Printer or Printer Connection dialog box.
4. Make sure that the Add Printer Wizard selects the Local Printer radio button, and the Automatically Detect and Install my Plug and Play Printer check box beneath this radio button before you click the Next button.
5. If the wizard is unable to detect your printer in the New Printer Detection dialog box, click Next to install the printer manually.
6. Select the port for the printer to use in the Use the Following Port drop-down list box in the Select a Printer Port dialog box and then click the Next button.
7. Click the manufacturer and the model of the printer in the Manufacturers and Printers list boxes, respectively, of the Install Printer Software dialog box.
If you have a disk with the software for the printer, put it into your floppy or CD-ROM drive and then click the Have Disk button: Select the drive that contains this disk in the Copy Manufacturer's Files drop-down list box and then click OK.
8. Click the Next button to advance to the Name Your Printer dialog box.
If you want, edit the name for the printer in the Printer Name text box. If you want to make the printer that you're installing the default printer that is automatically used whenever you print from Windows or from within a Windows program, leave the Yes radio button selected beneath the heading, Do you want your Windows-based programs to use this printer as the default printer?
9. Click the Next button to advance to the Printer Sharing dialog box.
If you want to share this printer with other users on the network, click the Share Name radio button and then, if you want, edit the share name (this is the name that the other users on the network see when they go to select this printer for printing their documents) that the wizard gives the printer in the Share Name text box.
10. To print a test page from your newly installed printer, click the Yes radio button selected beneath the heading, Would you like to print a test page? in the Print Test Page dialog box.
11. Click the Next button to advance to the Completing the Add Printer Wizard dialog box, where you can review the settings for your new printer before you click the Finish button or press Enter to finish installing the new printer.

Hi how do we fix error code 0x71 in px660

You should be able to change cartridges. It may be hard to determine what is wrong with the display but look for loose connectors on the back of the display, the controller board, etc.

http://manuals.by/files/Manual%20Epson%20Stylus%20Photo%20PX650_TX650_TX659_PX660_Artisan635_E.pdf http://manuals.by/files/Manual%20Epson%20Stylus%20Photo%20PX650_TX650_TX659_PX660_Artisan635_E.pdf

download a ink pad reset utility at epson.com/ipr or there are some other 3rd party s/w for ink pad reset