Epson Office Equipment & Supplies - Page 7 - Recent Questions, Troubleshooting & Support

Change Ink Cartridge in Epson Printer isn't a difficult. Just follow the simple steps to change ink cartridge in Epson Printer: ·Turn on Epson printer·Open its cover or scanner then left the unit of the scanner and wait for it. ·Ensure that the print head is at replacement position. If not the press "Maintenance" button. Follow the more steps to change ink cartridge in Epson Printer.

Normal 0 Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Are you facing trouble to install Ink cartridge in Epson printer? Follow the simple steps to install Epson printer ink cartridge: ·Turn on Epson printer ·Open its cover or scanner then left the unit of the scanner and wait for it. ·Ensure that the print head is at replacement position. If not the press "Maintenance" button. Follow the more steps to install ink cartridge in Epson Printer.

I think your Epson printer got stuck due to technical issue. After turn off/on your printer hasn't respond that means your printer have these issues: ·Outdated printer drivers ·Any object stuck ·Dirt inside the printer ·Outdated printer firmware ·Ink cartridge not installed properly or damaged inside and more In this situation, you need to contact Epson printer experts through Free live chat. Find here more Epson printer solutions.

The lights continually flashing indicate a paper jam or the printer being out of ink. Check/clear any paper jam and verify the ink cartidge is set correctly.

Epson printer not printing the color issue can be caused when you have dried ink cartridge, paper jam in tray, faulty printing settings, print head clogged nozzles and more. Follow the troubleshooting steps to fix Epson printer not printing issue: ·Check printer's wired or wireless connection ·Set your Epson printer as the Default ·Clean printer print head Follow more steps to fix Epson printer not printing correctly issue.

this means your printer wast pad is full but your printer can be reset let me no and i will send you the info on now to reset your printer

In the Epson scan window, click Configuration. Then click Other. Then click Reset all. As to what else to do, if you make it clear what componets are accomanying it, that would be good. For example, the power supply, any printer cabling that came with it, any film/slide holder that came with it, possibly the user manual. A comment about its condition is appropriate. You might look at some ebay ads for said scanneer. Hopefully, this addresses what you wanted to know.

Hi, please power cycle your device (with a 30 second delay) and then check for the error again. If it occurs, then you would need to check the product manual troubleshooting section to identify the specific meaning of the error. Thank you.

you should wipe and clean the copper contact to where the terminals inside the printer touches. Use a clean clothe moistened with alcohol for cleaning.

If the red light is still on the printer, and Status Monitor indicates that an ink cartridge is not recognised, follow the steps below:

1. Power the printer OFF.
2. Disconnect the power lead for 60 seconds.
3. Reconnect the power lead. Do not power the printer on yet.
4. Perform a printer operation check.
   
   
   • For help with performing a printer operation check, refer to your printer's user guide (available from Online Support & Manuals on the Epson Support website) or the following Related Article: How to perform a Printer Operation Check (Self Test)

Try this link

If you refilled these yourself you will need to go to google.com and serach how to make refill cartridges work on epson stylus NX400 there is a little computer chip that tells when the cartridge is empty you will have to disable this before it will work

Turn on your printer and open the top cover (not just the scanner lid) and press the maintenance button (the little paper icon with a drop) and wait for the head to move into the maintenance position. Now lift the ink cartridge clamp to expose the ink cartridge and carefully lift the old cartridge out. Now open the new cartridge and remove the yellow strip, but however do not touch the green tab, now insert the new cartridge with the green tab facing toward the front of the printer. Now close the clamp and re press the maintenance button and wait for the printer to recognise the new ink cartridge (30 secs.) And you are finished.
Thanks,
Ash.

You will have to be careful and precise. Using a needle or other suction product. Extract some ammonia int it. Let the printer move the head to center. Unplug unit. Take syringe and place a few drops into where the cartridge hole would have lined up Be carefull not to OVERFILL head. Install cartridges and let printer sit for an hour or so. . Power back on and let the machine do a self clean.Should be good to go.

Open the access door, move the carriage if necessary, and then remove any jammed paper. On some Laserjet printers, you might need to remove the toner cartridge and/or imaging drum to access the paper jam. If your printer has a paper path cover behind the carriage, remove the cover, and then remove any jammed paper Regards, Will

Paper feeder problem. You must open case and paper feeder.Check for all screw. spring, rubber and lubrication. If you never done, find diagram at printersiam.com. is printer paper jam berfore? and clearing jam by pulling paper form back?