Emerson Televison & Video - Page 7 - Recent Questions, Troubleshooting & Support
Emerson SR330 remote not working
1) Test the wires inside from remote control, could some wires is loose you need to solder.2) Clean the contact batteries with special spray contact cleaner.3) Retight the spring contact batteries for better contact.4) After you did all this , if there are NOT function you mus open the remote and resolder any point for cool solder.5) Otherwise you must reset the remote and put again the code go www.fitness.manualsonline. com or www.remotecodelist.com and download for free.sincerely. God bless you
Need remote code for my remote using an rca
Hi, people! This person didn't mention what model his RCA remote is... therefor, we cannot tell them codes. Every universal remote has a different code database. Their RCA remote may require a 3-digit code, or a 4-digit code, or even a 5-digit code. And even if it was a four digit code, the codes you guys provided has a good possibility to not work as they may be for a different RCA universal remote then what they have.
You must find the operating manual and code sheet for the exact model universal remote you have. A good source is rca.com.
I have a Emerson 32inch and the power won't work and a flashling volume button.Dont know what to do
Hi...
OK..I'm kinda confused with this question. How old is your TV ??
I went to the Amazon Web, I looked at Emerson TV..all flat screen, (that seems to be all that is sold these days)...but all the TV's I saw, have various RCA, HDMI, Ethernet, mini-jack, and USB input...some of these are outputs like my audio outputs I use for my Bose system, for the large rich sound coming from the entertainment center. Everything is on the backside unless you are talking about a TV mounted on the wall, and you don't have access to the backside, cause it ain't your TV to be messing with..
Good Luck
shamim
5/15/2020 2:15:59 AM •
Emerson...
•
Answered
on May 15, 2020
Code for my universal DT008 remote TO hook up my emerson llc320
0225 0324 0378 0421 0456 0460 0604 0611 0654. Check these codes. Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right of the display window [Desktop only], or view it by "webview" at mobile; It will help you to find it easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
4/19/2020 11:15:41 AM •
Emerson...
•
Answered
on Apr 19, 2020
MY EMERSON TV SAYS THAT IT CANNOT ACCESS PC MODE AT THIS MOMENT.
dOES IT NEED TO BE UPDATED OR UPGRADED
Did it previously access your PC?
There may be compatibility issues.
Use the menu button on the Emerson TV to select a new "source." Choose "VGA" input, then confirm that by pressing the OK button (normally the volume+ button on most televisions). The television should immediately switch to display the computer's output. https://www.techwalla.com/articles/how-to-connect-a-computer-to-an-emerson-tv
All this assumes you are connecting through a VGA cabling connection. However, an alternative is to connect the TV and computer with a specialty cable called a VGA to HDMI cable which may be acquired at Radio Shack. This is assuming your computer has an HDMI port. The cable is NOT inexpensive.
As you are attempting to use a TV as a computer monitor, you may have to adjust screen resolution on the TV to match that of the output of the computer. You would have to go through the TV menu settings to adjust screen resolution.
As you have not identified the model of the TV nor the OS of the computer, it is difficult to predict your success. There might even be an issue of graphics card compatibility. I can't say if this is an upgrade issue as I have no information identifying the models of the hardware you are using nor if you had prior success with a connection. But the information I've provided seems to be the most likely to offer you some success in a connection. You can try to find out if there is a firmware upgrade for the Emerson by chasing the support for your particular model of Emerson TV on Emerson's own page. You can also identify your graphics card via freeware utilities. That info might be helpful to a support tech.
4/18/2020 11:42:29 PM •
Emerson...
•
Answered
on Apr 18, 2020
My flatscreen emerson tv will not turn back on.
I found a way around this problem. When this happens, don't use the remote.
Walk up to the TV, then HOLD DOWN the power button and while the lights are flashing, start pushing the menu button on the TV at the SAME TIME.
Then your screen will turn on. No idea why this works. Just stumbled on it while getting ********** that this TV, I had less than a month, suddely would not come on anymore. I was about to unplug the whole thing to take back to WalMart and just started pushing button combinations and found this worked.
Playing recordable dvd
My Emerson won't play anything except DVD Movies, never has, wasn't suppose too. Make your movies in DVD Video format and it will read them fine (unless it's broke). I make movies all the time and play them back in mine. It reads DVD-R, DVD+R, and in duel layered. It will not read RW disks!
Man I've every problem you can imagine with DVD Players. I've found when the disk gets stuck, as long as it's not jammed. You can turn the unit off or unplug it. Plug it back in but DON'T TURN IT ON! Instead hit the eject button and the drive should open the drive without trying to read the disk.
Not finding what you are looking for?