EliteGroup Computers & Internet - Recent Questions, Troubleshooting & Support
Computer freezes when trying to detect S-Ata drive
Hi Eamon, download Samsungs drive setup utility, tools from Samsungs web site. Creat a bootable floppy drive setup disk or a CD bootable disk.
Enable the SMART function using the setup software.
If you are going to use the Samsung drive as the primary master drive as the new C:\ you will need to enter the bios & set the Hard Disk Boot Priority, page 30 in you're manual to see the Samsung drive.
Connect only the Samsung into the system. Boot the system & use Samsung's software to setup the drive & format.
Disconnect any other hard disk drives that may have windows installed in it.
on Oct 31, 2019
How many unemployeers are in the USA
That number is subjective, last I heard there are 28 million and one unemployed. The one being me. doh! That is a speculative number, while the official is around 13 million. I guess those that can actually be counted, like still collecting unemployment or other benefits.
on Dec 28, 2018
Driver P4M900T-M2 for Windows7
you have not stated which driver so I am unable to direct to a specific driver
if you are having trouble with your drivers
here is a general look at the drivers and how to update them
if your computer came with a motherboard disc the drivers could be on it
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver hope this helps
on Oct 07, 2018
I put my PC (windows
Since you have already done the restart and there are no error messages showing that the system disk is bad, it may be a short or incompatibility in one of your usb plugs. Remove all plugs except for keyboard and mouse and then restart. Also make sure it is not trying to boot off a CD or DVD by removing those as well.
on Jan 29, 2018
ECS 648FX-A1 can it use high density memory?
The Motherboard limitation are DDR400 = 2GB maximum size per slot
Allthough you can with slower memory DDR333 or DDR266 go to the 3GB memory limit.
Due to the age it will be trail and error on the memory types. You won't necessary get any problems with the high density memory as long as it is good quality memory and you don't exceed the slot memory limit as mentioned above.
I recommend that you download the motherboard manual and read it.
on Dec 02, 2017
Not finding what you are looking for?