Electrolux Kitchen Ranges - Recent Questions, Troubleshooting & Support


It can be one of several fixes depending on the exact model. First reset the display either at the breaker panel, unplug it, or on the display itself using the - and + (depressing at the same time for several seconds) if equipped. On some models it can also be a problem with the latching mechanism and cleaning may be all it needs.

Electrolux... | Answered on Oct 13, 2019


f14 misconnected keyboard cable. 1) verify connection between display board and touch panel (2 ribbon electrical cables).make sure the cables are completely seated into the connection point both ends. If the cables are connections check ok then replace the touch panel. If the problem persists still occurs replace the complete display board

Electrolux... | Answered on Sep 18, 2019


It's ridiculous why would you want to remove the racks in self cleaning mode you want to clean the racks also what good is self cleaning

Electrolux 30"... | Answered on May 08, 2019


Usually all you have to do is hold your finger on the icon until it either locks or unlocks. Otherwise contact Electrolux:

USA
1.800.944.9044
Electrolux Home Products, Inc.,
10200 David Taylor Drive
Charlotte, NC 28262


Canada
1-800-265-8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada L5V 3E4

Electrolux... | Answered on Apr 28, 2019


Is the door locked? if it is it won't close all the way if it was in the locked position before it was closed. like if it was programmed for "self clean" without the door being closed, the lock would be engaged still.

Electrolux... | Answered on Mar 08, 2019


Since there are gas fumes this is a dangerous situation and should really have a professional with the right equipment to find the leak.

Electrolux... | Answered on Feb 09, 2019


sure call for a repairman as it is under warranty and if you mess with it , you will possibly have none .

Electrolux 30"... | Answered on Jan 16, 2019


Could be a bad breaker, or a wrong breaker, in the install instructions it will list the required amperage rating for the breaker. If the breaker is over 7-8 years old, could just be bad internally.

Electrolux... | Answered on Jan 08, 2019


An "F11" typically stands for a shorted keypad. You can reset your appliance by unplugging it or disconnecting power for ten minutes. If you perform this step and continue to receive an "F11" it could be an issue within your EOC (Electronic Oven Control) and I would recommend having a professional come out to properly diagnose your range

Electrolux... | Answered on Dec 25, 2018


Try unplugging it for 5 minutes

Electrolux... | Answered on Dec 18, 2018


Searpartsdirect.com or repairclinic.com

Electrolux... | Answered on Nov 21, 2018

Not finding what you are looking for?
Electrolux Logo

509 questions posted

Ask a Question

Usually answered in minutes!

Top Electrolux Kitchen Ranges Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Eric Rotmil
Eric Rotmil

Level 3 Expert

587 Answers

Mike Henne

Level 1 Expert

27 Answers

Are you an Electrolux Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...