Eagle Boating - Recent Questions, Troubleshooting & Support

I have the same problem.Cuda 168.There is no simulating mode in menu.What s the problem?

Question edited for clarity. Question moved from Eagle Televisions. Phone and ask them if you can send it in. Very often your local marine electronics shop will have a preferred technician. https://www.manualslib.com/manual/41681/Eagle-Fishmark-320.html?page=90 ..

Sounds like it is just broken. Time for a new one.

Do you need a battery or a charger ... a battery is rated in mah and a charger is ma or amperes. 1000 ma is the same as 1 ampere.

see the following link https://b.thursailso.com/?did=&l=UBJONf5vSzgEmgl&oaid=&s=&ssk=6e0805c4d18745718dc966251aeaff8e&svar=1549962107&z=&ppi=82017&pci=4098040295&meta-id=MjI1MTk0&meta-tds-id=MTYxNzc&pz=2194484&ff=1&pushrot=3&var=deny&var=deny

See later answer.

I am a bit reluctant to answer this question as it may sound like I am being rude, but here goes. Type the name into google. It will tell you this is a discontinued product, and will also tell you the nearest service place to contact which will probably be a Lowrance agent. Call them and ask if it can be repaired. If so send it to them with a note explaining what the problem is. If it cannot, throw it in the bin and buy a new one. Easy.

may want to call or email the manufacture of the unit for that info

hello there:
here is a link that will help you get the manual u need ok?
best regards micha
Eagle 250 DS - FishEasy GPS Learn more about the Eagle FishEasy 250 DS before you decide to buy. Download User Guide and Manual ... fish finder EAGLE FISHEASY 250DS. www.bestfishfinder. ...
www.retrevo.com/s/Eagle-250-DS-GPS-review-manual/id/23493bh848/t/1-2 - 69k - Cached el

Hey Floyd, check this out:www.eaglenav.com › Downloads

try hitting the on and off button it should fix it that is your lite skle and britness

Sorry but I have the same question. I will try to break in the unit. Then I will letyou know.

Check the green wire closely. It should be a coax going to transducer.

The impedance match most likely won't. I advice you not to attempt. Replace with matching Eagle model transducer.

Try this, hard reset-FYI-This will delete saved data

1. Turn unit OFF-Press and hold the UP arrown key
2. Press power, unit will enter production keyboard test mode
3. Release the buttons
4. Press PWR/CLEAR key 7 times. (SYSTEM INFO SCREEN)
5. Press MENU/DOWN and unit will shut off

Hope this helps