Duravit Home - Popular Questions, Answers, Tips & Manuals

Contact Duravit or its distributor to request the manual.

http://productcatalog.plumbingonline.ca/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DSde3ef6eb-79c9-4905-98e4-5280331b4f33 https://plumbingonline.ca/products/duravit-0929100005 See links above.

Are you sure the flapper is dropping back down? Theflush handle may be sticking and holding the flapper valve up.

Depends on the model you have. Try the back of the unit or under the supply panel on the left side.

Are the install correct ?I can't believe an install time frame where the technician is actually on time! Work was done quickly and efficiently. Definitely one of the best install experience I've had. Thank You. Heated Toilet Seat Installation

Try this link: https://www.happyisclean.com/Products-Duravit_Parts.html

Remove and clean the flush valve and the flush valve seat(it is the flap that opens up to allow water to flush the toilet). Once the edges of the valve and the seat are cleaned, possibly with "0000" grit bulldog steel wool, it should not leak anymore. To make sure it is not leaking, once tank has refilled completely, put some food die in the tank. If, after 10-15 minutes, the water in the toilet bowl is colored, you have a leak from the flush valve. Replacing the flush valve is very easy - just bring the old one with you to the hardware/plumbing store and ask for a replacement. Blessings and good luck!!

Google the company they will have price and stockist in you area

Look inside the tank under the lid, it sounds like the flapper that lets the water into the bowl is getting hung up on something when you flush. It could be the flushing lever. This would cause the flapper to stay open letting water to just pour into the open sewer line. It should be a simple fix. Just see what is binding the flapper & make an adjustment.

You can't. Water level is set by the design of the trap built into the ceramic base. Can only adjust height of water in the tank.

replace the fill control as there is a failing of the control rubbers .

The check valve may be defective. Replace.

make sure the toilet shut off is all the way on (if there is one) replace filler valve and should fill quite quickly.

Contact the manufacturer.

pull the control section from the cistern. Normally they are only press plastic tabs and the whole unit lifts out.

The level is determined by a floating device connected to the water valve. Some are on an angled arm and some move up and down. Determine how your valve is shut off and either change the big round float or adjust the clips on the rising one. Just keep the level below the overflow and the flush handle to avoid a running toilet or a leak.

Make sure your new flapper is the same as the old one and replace the new one the same way you removed the old one.

Many hardware stores has replacements.. IE Lowes, HomeDepot Ace etc.

copy and paste link https://terrylove.com/forums/index.php?threads/duravit-fill-valve-inlet-valve.83232/

try the demolition shops as they will probably have what you want in the yard