DISH Network Televison & Video - Answered Questions & Fixed Issues

Hi, Mary with Dish Network Customer Service. When the picture alternately goes from normal to a black screen, it is an indication of an intermitten signal issue. You can attempt to reset the receiver box by unplugging it from the power for 10 seconds and letting it reboot. Hopefully this will resolve your issue.

C?DIGO para el tv TEC por favor

nmg55

Not all remote are compatible with all our receivers. Depending on the receiver and remote model numbers, if they are compatible you can readdress the remote to the receiver. I have provided a link for readdressing the remote to the receiver. I hope this helps.

Instructions on how to readdress the remote to the receiver:
http://www.dishnetwork.com/SupportSection/remote-setup
Remotes and receivers models:





222 -
21.0 IR / UHF Pro


222k - 21.0 IR / UHF Pro


301 -
3.4 IR


311 -
3.4 IR


322 -
4.4 IR / UHF Pro


381 -
6.4 IR / UHF Pro


411 -
20.0 IR


501 -
6.4 IR / UHF Pro


508 -
6.4 IR / UHF Pro


510 -
6.4 IR / UHF Pro


512 -
6.4 IR / UHF Pro


522 -
6.4 IR / UHF Pro


612 -
21.0 IR / UHF Pro


622 -
21.0 IR / UHF Pro


625 -
6.4 IR / UHF Pro


722 -
21.0 IR / UHF Pro


722k - 21.0 IR / UHF Pro







Ray Calo
DISH Network

If the dish network remote control is universal it may work with limited functions. If the remote control has buttons labeled cd, receiver, cable or Aux etc. it might work. The manual will tell you for sure. It will also provide you with the proper code for the component to work.

It sounds like you have interference, try removing the uhf ant from the back of rec and promgram it straight from there. you can also hookup "bunny ears or a pigtail coax to the uhf ant port to increse uhf signal. also make sure the uhf ant is standing straight up.

SORRY BUT WE KNOW OF NO FIX FOR YOUR PROBLEM

This website: https://universalremote.codes/dish-network/

you need to ask the people from dish not diyer's

Contact dish to inquire. Their remote control may or may not contain the applicable code.

Hi there! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to help you. Please perform a hard reset on the receiver. To do a hard reset, you simply unplug the receiver from the power outlet it is connected to, leave it unplugged for 20 seconds, then plug it back in. The receiver reboot process takes about 5 minutes. Once the show is back on, try accessing your DVR again, if it is still not working, the receiver will need to be replaced. If this is still a problem, please feel free to email me at kimberly.escobar2dish.com with your account number so we can get this resolved. Kimberly Escobar Social Media Representative DISH L.L.C

https://www.youtube.com/watch?v=iyvBW5H88ow

Consult operating agencies for help to a code for your tv report.

It may be a virus in the system , take the system out for scanning and if it continues , get new antena / aerial which capture network with power.

Look for an 'I' for info or 'display' button. Exact answer depends on tv make

Here is the user guide for the remote: http://www.yamaha.com/yamahavgn/Documents/YEC/Other/RX-V567_Programing_remote_control_codes_for_TV_Control_Key_operations.pdf

No codes needed just use the TV pairing wizard under the remote control settings. See the guide below...

Call Dish and check if your service is active, then have them send a programming authorization hit to your 722.

See the website here:

Yellow plug in is the green on at the top.

Yes. Just use the same coax satellite cable.