Dell Office Equipment & Supplies - Page 3 - Recent Questions, Troubleshooting & Support

Dell products are terrible.

I've had the same error with a Dell 3115CN. I've called Dell and they told me that the cause of the problem lays in the scanner-lock. Underneath the scannerlid is a grey lock-button wich parks the scannerlamp. This button seems very sensitive. Just lock and unlock and the problem should be solved.

Have you attempted leaving the printer unplugged (if possible in the on position) for a period of 5-10 Minutes?

I cleared that error on one by replacing the fuser. It had a small piece of paper stuck in the roller.

the belt inside the drum has moved to one side and the printer can't read the magnetic patch on the belt. open the drum and move the belt over and replace it , then turn it on,... it will keep doing this, so you will need to replace the drum...

Perfect printing from my 2130CN but increasingly constant paper jams. Various Codes, 077-102, 077-901, 071-100 and 071-700. Checked the roller in the tray and found it was not free running - quite difficult to turn. I felt this was wrong but was unable to free it up. Clearly designed not to be free running by some system inside the roller itself. Had discussions with Dell where they advised a new roller kit was required, but they didn't have one. Maybe later! I looked more carefully at the roller and decided to make it free running as I felt it should be. Two small lugs on the white plastic support at one end locate with the system inside the roller preventing it from rotating without considerable force being applied. I ground off the two locating pins allowing free rotation and re-installed. Printer works now works perfectly. Asked Dell what is inside the roller but they respond that they want to talk on the phone - but they don't. I suspect that whatever is inside the roller expands and slowly jams over a period of time requiring it to be replaced on a regular basis! With no information from Dell I suspect a simple SCAM to make money! [email protected]

The problem correspondent to this error code is: "Error relating to PCL emulation problems occurs."
The solution is: · Press the "Return" buttonto clear the message, cancel the current print job, and conduct the next print job, if any. Press Cancel to cancel the print job.

I fixed my 016-302 by replacing the network cables.

That means whatever you are trying to print is set to feed from the MP tray or Multipurpose Tray. The tray that folds out that is used to feed thicker paper or envelopes in. Just check your print setup screen and tell it to feed from the lower tray or tray1. If that is what you were trying to do.

did u do what it says?

paper jam 234.01 lexmark x364 dn am not able to see the jammed papers how to remove them urgent

buenas noches. tengo un problema con mi proyector.. hace unos minutos encendio y se veia la imagen pero luego lo desconectaron y cuando volvi a encender solo prende la luz de power pero no sale la imagen quen podra ser???

all printers made , modern this is and was an option new 313 was an option, 2009 old printer it is, the manual tells how to use that, here if it is present. did you used USB before not told. and if yes or the seller did used and you bought printer the printer must be reset;. page 21 https://www.manualslib.com/manual/227801/Dell-V313.html?page=21&term=reset&selected=1#manual or is this a pre buy question, if yes ask them. can can not ESP THEM NOR PRINTER OPTIONS EVER. non deities we are page 55 is wireless setups. The printer supports three wireless security options: no security, WEP, and WPA/WPA2 wpa2 is the best, others are super un-secure. page 88 wifi trouble shooting is there. if printer is used, (bought) page 89 must be reset

none we know of check with manufacturer

There "may" be one possible solution, which people have had success at.

The Dell 922 printer is the same as a Lexmark X5270

Lexmark has Mac OS X drivers for their version of it.

If you have Mac OS X, the driver can be obtained here:

http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:440:0:0&searchLang=en&os_group=Mac%20OS%20X&target=

You can't have a Dell cartridge refilled. It's Dell's way of making big bucks selling overpriced cartidges. Their practise is almost illegal and eventually they will get sued.
Buy an HP or a Kodak printer. Both sell better printers and their cartidges can be refilled.

Hi there, just found this solution to work perfectly. i just freaked out for a moment with the same problem. Use this or just type fax and scan in your help function. Hope this helps!

Before you begin, make sure that you've installed your scanner on the computer and that the scanner is turned on.

1. Windows Photo Gallery.
   
2. Click File, and then click Import from Camera or Scanner.
   
3. In the Import Pictures and Videos window, click the scanner that you want to use, and then click Import.
   
4. In the New Scan dialog box, click the Profile list, and then click Photo. The default settings for scanning a picture are automatically displayed.
   
5. If you're using a scanner with a document feeder, click the Paper size list, and then click the size of the picture that you've placed on the scanner or click the size that most closely matches the picture.
   
6. Click the Color format list, and then click the color format that you want the scanned file to display.
   
7. Click the File type list, and then click the file type that you want to use to save the scanned file.
   
8. Click the Resolution (DPI) list, and then click the resolution, in dots per inch, that you want to use.
   
9. Adjust the brightness and contrast settings or type the values that you want to use.
   
10. To see how the picture will appear when it is scanned, click Preview. If needed, modify the scan settings, and then preview the picture again. Repeat these steps until you're satisfied with the preview results. Some scanners might require you to place the picture in the document feeder each time that you scan.
    
11. Click Scan. When the scan is complete, Windows Photo Gallery prompts you to tag the picture so that it's easier to organize or find later.
    
12. In the Tag these pictures (optional) list, type a tag name, and then click Import. Windows Photo Gallery displays the picture so you can view, fix, or organize it.
    

Please have a look if you have Dell 1700 series laser printer. Please follow the instruction bellow to reset printer to factory default: 1. Power Off the Printer from the back switch from the back 2. Open Front cover 3. Hold Down “Continue” & “Cancel” button while turning printer on

se http://digg.com/hardware/How_to_Reset_Dell_1700_1700dn_1710_1710dn_1720_1720

Regards Anders.Thornberg.Qnetcom.se

Believe it or not... the driver is buried on the Dell site for Vista 64-bit. I search and searched ... and there it was.

http://support.us.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R153048&formatcnt=1&libid=0&fileid=203948

In any case, I downloaded it, installed it, and it works fine. All the buttons (scan/copy) on the top work as well as printing. Now if I could just get my old XP machines to print to it on the network. But.. I think that is another thread.

this error means
Replace DrumCart
091-935
Drum Full of
Waste Toner

The drum cartridge needs to be replaced. fro more information about how to remove it you can got to following link
http://support.dell.com/support/edocs/systems/3100cn/en/UG/section22.html#172399