Day-Timer Hardware & Accessories - Recent Questions, Troubleshooting & Support

Do you have the Utilitec number?
Add a comment with description of timer I can help.
I own several Utilitec timers.

Following link shows programming for 4 different Utilitec timers;
http://waterheatertimer.org/How-to-program-Utilitec-0144506.html

Make sure your timmer is set to "AUTO" mode and that your programed times/weekdays are good, resetting the timmer should solve your issue i've had it before, these timmers do this to me once and a while. Make sure you dont have an "O" on the left of your time as this randomises off/on times by 2 to 32 mins. Press "HOUR" and "MINUTES" at the same time to toggle this option. the timers manual can be found here: Eco Plus Digital Timer

Reset timer using reset button, and see if functionality begins.Plug timers into different outlets.Test outlets for correct polarity and that they deliver at least 80% rated value, 115 volts x 80% = 92 volts.http://waterheatertimer.org/Woods-timers-and-manuals.html#TimexMost timers have 1 year limited warranty through manufacturer.Timex timers are not made by or display on Timex website.Unknown where warranty is honored.Suggest GE, Woods, Intermatic timers since these have specific web links for warranty coverage, but you have to send timer in.This is why I suggest buying timers at local box store, then if problem occurs, buy another timer and return defect in new package, thus giving convenient extended warranty coverage. If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

817? http://waterheatertimer.org/Woods-timers-and-manuals.html#HPM Gene h If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Fixya does not sell or warrant timersCopy following link to identify Timex timer.http://waterheatertimer.org/Woods-timers-and-manuals.html#TimexTimex does not show timers on their website, and unknown who carries warranty for this line of timers.If you want clear warranty coverage, I suggest Intermatic timers, and Woods timers, or Sylvania, Leviton.Each of these brands has clear warranty procedure shown on website for each.Add a comment for more specifics If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Copy following link to identify Ei400 series programmable countdown timer and download possible manual:http://waterheatertimer.org/Intermatic-timers-and-manuals.html#Ei200Hold down ON/OFF button and fully press-and-release small round reset button using paper clip.Keep holding ON/OFF button until display changesThis timer uses CR2 battery installed in tray below the buttons.Reset timer after installing new battery.If functionality is not restored after new battery install and reset, then timer has gone bad.This timer has 1 year limited warranty through Intermatic for defects in workmanship.Ei400 can be wired for single-pole or 3-way.Timer requires no neutral wire since battery operates the timer and relay circuit If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

EI600 is a heavy duty 20Amp in-wall timer that is battery operated, and can replace single-pole or 3-way switches.
Intermatic page
http://www.intermatic.com/products/timers/in-wall%20timers/electronic%207-day%20astro%20time%20switches.aspx


EI600 manual
http://www.intermatic.com/~/media/files/intermatic/products/instructions/timers/ei600c%20-%20english.ashx

How do you program the Utilitech Outdoor 6-outlet Stake Timer

Utilitec makes 2 different plug-in timers.
Utilitec 0155671 is about size of baseball and has 5 buttons and two outlets. Programming is shown on link below.
http://waterheatertimer.org/How-to-program-Utilitec-0155671.html

Utilitec 0144506 timer is small and rectangular with 5 buttons and slide switch located on top of timer. This timer can turn lights on-off once a day and has 1 outlet. 0144506 Instructions are given in steps shown below.
Also see:
http://waterheatertimer.org/How-to-program-Utilitec-0144506.html

Steps:
-Plug timer into wall for 1 hour until rechargeable battery is charged and display shows.
-If battery will not charge, then check electricity to wall outlet, if electricity is good and battery will not charge, then timer is no good.
-Lamp has to be turned on for timer to work. Check bulb if timer stops working.

-Unplug timer to set program.
-Press reset button with paper clip to remove any programming.

-Slide switch on top of timer to 'Timer'
1) Set current time
Hold down Time button
Press HOUR until current hour am-pm shows in display.
Hold down Time button
Press MIN button until current minute shows
Since this is a one-day repeat timer, no day program is available.

2) Program ON > this is when you want lamp to turn ON
Hold down ON button.
Press HOUR until ON hour with am-pm displays.
Hold down ON button.
Press MIN until ON minute displays.

2) Program OFF > this is when you want lamp to turn OFF
Hold down OFF button.
Press HOUR until OFF hour with am-pm displays.
Hold down OFF button.
Press MIN until OFF minute displays.

3) Set timer to operate
Make sure slide-switch on top of timer is set to 'Timer' to run program
Plug lamp into timer, and then plug timer into wall outlet
For manual override, move slide-switch to 'On' and light will stay ON

T51211BC is 120Volt timer that can be wired many different ways because there are two internal relays, and each relay has NO and NC terminals. One relay is controlled by timer dial trippers, and other relay controlled by dawn-dusk photo eye

Timer wiring cannot be fully explained with words.
Below is basic hook-up for your 120Volt wiring application, and then you can use a tester and experiment with the knob settings, and tripper settings.
http://www.intermatic.com/products/ec%204%20layer/mechanical%20time%20switches/24%20hour%207%20day/t50000%20series%207-day%20time%20switch.aspx

1) You have 4 cables:
one cable from circuit breaker box;
one cable going to photo control;
one cable going to outdoor Load (lite);
one cable going to indoor Load (lite).

2) Cable from circuit breaker has 2 wires:
Black Hot wire connects to terminal 1
White Neutral connects to terminal 2
This will power the clock motor and timer relays.

3) Photocell has 3 wires:
Black connects to terminal 1
White to terminal 2
Red to terminal 3.
Photocell turns relay on-off for Circuit B
Do not mix different size wires under same screw terminal, or smaller wire will come loose over time. Also do not mix stranded wire and solid copper under same screw terminal for same reason.

4) Terminals 4 thru 12 are 'dry'.
Dry terminals receive no power when power is applied to terminals 1 and 2.
To put power on dry terminals, so that Load will have power, attach Black hot wire from breaker to terminals 9 and 12.
So add a jumper wire from terminal 1 to terminal 9 and another jumper wire from terminal 9 to terminal 12.
120Volt power is now connected to terminals 1, 9 and 12

5) Circuit B is dawn to dusk for outdoor Load.
Outdoor load cable has Black and White wire.
Connect outdoor Black wire to either terminal 10 or 11.
To test which is correct for your application, set switch to Auto, and then test across terminals 12 and 11, and across terminal 12 and 10. Repeat test after dark. Rotate knob B to each position and repeat test.
Connect outdoor White wire to terminal 2, and this will complete the circuit.

6) Circuit A is Dusk ON and timer OFF
Indoor cable has Black and White wire.
Connect indoor Black wire to either terminal 7 or 8.
To test which is correct for application, set switch to Auto, and then test across terminals 9 and 8, and across terminal 9 and 7. Repeat test after dark. Rotate knob B and repeat test.
Connect outdoor White wire to terminal 2, and this will complete the circuit.

Open following link for Timex manuals that might include yours:
http://waterheatertimer.org/Woods-timers-and-manuals.html#Timex

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Open following link for misc Timex manuals.
http://waterheatertimer.org/Woods-timers-and-manuals.html#Timex

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Open following link for misc Timex/ Westek manuals.
http://waterheatertimer.org/Woods-timers-and-manuals.html#Timex

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Open following link for misc Timex manuals.
http://waterheatertimer.org/Woods-timers-and-manuals.html#Timex

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.