Canon Office Equipment & Supplies - Page 3 - Recent Questions, Troubleshooting & Support
Orange light on in service mode
Same thing here. Solid light stays on after trying to put into service mode.. did you get any solution before I dump this printer? Thanks
How to Setup Canon Pixma In Macbook?
The functioning of your Mac Book is a little different from Windows. It is possible that this may get you confused. Let's take a look at the steps for Canon Pixma MG2522 setup in Mac. Click on 'Drivers and software' options in your printer and chose the version of Mac OS you are currently using. Start downloading the printer driver on Mac. Then, double click the downloaded file to run it. Now, you have to select the 'Continue' button twice. Thereafter, press 'Install' to add the Canon Printer to your Mac Book.
https://connectmyprinter.com/how-to-setup-canon-pixma-mg2522/
How do I connect a Canon Pixma MG2522 in a MacBook?
The functioning of your Mac Book is a little different from Windows. It is possible that this may get you confused. Let's take a look at the steps for how to connect Canon Pixma MG2522 setup in Mac. Click on 'Drivers and software' options in your printer and chose the version of Mac OS you are currently using. Start downloading the printer driver on Mac. Then, double click the downloaded file to run it. Now, you have to select the 'Continue' button twice. Thereafter, press 'Install' to add the Canon Printer to your Mac Book.
https://connectmyprinter.com/how-to-setup-canon-pixma-mg2522/
Can't connect to wireless network from canon mp499
Steps to Connect Canon MP499 to Wireless Network:
1. Check Wireless Network Settings:
Make sure your wireless network is operational and that you have the correct network name (SSID) and password.
Ensure that your Canon MP499 is within the range of your wireless router.
2. Printer Display:
On the printer's control panel, navigate to the setup menu. Look for a wireless setup option.
3. Run the Wireless Setup Wizard:
Initiate the wireless setup process on the printer. This often involves navigating to the "Wireless LAN Setup" or a similar option.
Select the option to connect to your wireless network.
4. Enter Wi-Fi Credentials:
When prompted, enter your Wi-Fi network name (SSID) and password. Ensure that you enter the correct information.
5. WPS (Wi-Fi Protected Setup):
If your router supports WPS, you can use this method for easy connection.
Press the WPS button on your router.
On the printer, select the WPS option and follow the on-screen instructions.
Greetings,
Antonios
Canon Pixma mx300 printer has paper jam
Canon Pixma MX300
- new cartrige for Black ink
- can scan
- can photocopy documents
BUT can't print documents from my MacBook eventhough the paper feeds and goes out at the other side
Scanner error code 2 179 11 ? please help..
Disconnect the usb (which is the power source) to the printer. Next, install the printer driver. If you don't have it handy, get it from the Cannon site where you will locate it by Computer model. Download it, double click upon it to install it. Keep an eye on the name of the file as you download it because you will have to find it on your computer.)
Next, check that the driver was installed in Device Manager. (Look in Printers)
After that, plug the usb back into the printer, powering it. Turn on the printer. Your computer should detect it shortly, automatically. If it does not, turn off everything. Turn back on the computer. Turn on the printer. Good luck.
The original in the feeder error message
The problem in my case was a wire interrupted from the sensor , you have to open that part and will find 3 purple wires that come from the sensor and go to the main board , one of them was interrupted
How to Reset Canon IR1022IF?
you can make a factory clear , it erase all configuration made .
in control panel make the next secuence
press additional function
press 2
press 8
press additional function again .
service mode (#SSSW )will appear in the screen if doesn't repeat the procedure
with arrows < > Search for item CLEAR
press ok once
with arrows < > Search for item All
press ok once more
the copier will reset and restart, may take a few minutes . if don't restart by itself, turn off and then on from main switch
Print legal size paper problem
when you give print command that time chage the paper size from a4 to legal in print proeprties and choose paper size legal.
Not finding what you are looking for?