Canon imagePROGRAF - Popular Questions, Answers, Tips & Manuals
Canon w6400 printer does not give me option to print long prints over A1
https://www.usa.canon.com/internet/portal/us/home/support/details/professional-large-format-printers/professional-photo-fine-art/ipf6400?tab=manuals copy and paste this address into your browser's address window press enter will take you to the canon support window for your printer for software and firmware and manual downloads
1/1/2018 10:30:04 AM •
Canon...
•
73 views • 0 helpful votes
Hello, i'd like to ask for advice. I have this one
iI would check your paper type setting. you are working with a liquid type of ink and water will effect it. check the drying time of this ink. set your paper type to the set the type most suitable for this paper. try heavy gloss. you will find it under paper settings in the main menu. If no luck refer back to the ink and its compatibiliy with your ipf 8000. now if these are a recharged cartridges. you should change to the oem. meaning" original engineering manufacture".
4/9/2017 4:42:03 PM •
Canon...
•
55 views • 0 helpful votes
How to update canon ipf605 firmware through download mode
To enter DOWNLOAD MODE the machine has to be switched OFF. While the machine is off, hold down the stop button and the information button. Keep these pressed and switch the machine on, keeping the buttons pressed until you see an S in the top right-hand corner of the display, then let go of the buttons. You should now be in DOWNLOAD MODE.
then later you can use L printer services tools to update or go to canon website select support & download select you model machine and windows OS find firmware update tools .after install it he will automatic detect you printer then he will go internet online download the new firmware install it.
please never do any printing when upgrading firmware. After finish it will automatic restart machine.
11/17/2016 2:13:57 PM •
Canon...
•
1,285 views • 0 helpful votes
Canon ipf605 printer will not enter service mode, how do i correct it
try this method mode.
To enter SERVICE MODE the machine has to be switched OFF. While the machine is off, hold down the sheet or roll feed button and the information button. Keep these pressed and switch the machine on, keeping the buttons pressed until you see an S in the top right-hand corner of the display, then let go of the buttons. You should now be in SERVICE MODE.
11/17/2016 2:08:19 PM •
Canon...
•
741 views • 0 helpful votes
HOW TO RESET ERROR E161-403E
- To enter SERVICE MODE the machine has to be switched OFF. While the machine is off, hold down the sheet or roll feed button and the information button. Keep these pressed and switch the machine on, keeping the buttons pressed until you see an S in the top right-hand corner of the display, then let go of the buttons. You should now be in SERVICE MODE.
first try to print nozzle check in services mode.
Scroll right to the service mode box (rightmost box) and press OK. You should then see the word 'DISPLAY'. Scroll right until you see the choice 'ADJUST' appear. Then scroll down until you see the choice 'NOZZLE 1' appear and press OK. If you haven't already loaded paper, the printer will prompt you to do so and then it will print out the NOZZLE CHECK PATTERN.
check go any nozzle no firing out ink..if ok means printhead problem need replace.
later go to maintenance menu choice
replace print head.
then follow their picture image to replace the print head.
5/3/2016 4:43:30 AM •
Canon...
•
18,677 views • 0 helpful votes
What is causing persistent error 03130031-2F3A?
hi, are you machine is use for long time ?? see may be is usage ink tank supply unit reach the counter count limit,may be need to reset it by use canon service tools.but this tool only got in canon service tecnician only. if usage no high look like is the main controller PCB fauly need to replace it,this part will cost high cause very expensive price to replace it.
4/5/2016 2:24:17 AM •
Canon...
•
2,766 views • 0 helpful votes
Error code E161 403E on Canon ipf8000
The Head right have problem and you can replace it and install it again if the printer read it you can use it for short time.
3/8/2016 8:13:32 PM •
Canon...
•
1,213 views • 0 helpful votes
I have replaced the print heads, and instead of printing red, which I made, it is printing black
DEAR FRIENDS;
PLS DO THIS FIRST STEP FIRST
How to print nozzle check pattern iPF6100/iPF610/iPF710/iPF8000S/iPF9000S/iPF800/iPF9100
- Load unused paper.
- Press the Menu button to display MAIN MENU .
- Press or to select Test Print , and then press the button.
- Press or to select Nozzle Check , and then press the button.
- Press or to select Yes , and then press the OK button.The printer goes online and prints a test pattern.
Second later print out result pls compare you result print with my attachment picture.
let say if anything color no same like example red = black,yellow = yellow black , cyan = dark or magenta = green.
this means got dirty on site purge unit and printhead unit. you need to call canon technician done services for you because i can't teach you how to clean the purge unit and print head unit scared you will spoil this both unit.
Hope can help you ,TQVM..
4/13/2016 6:35:26 PM •
Canon...
•
183 views • 0 helpful votes
Where is the serial number laocated?
Status Print
You can print a Status Print report indicating the current status of the printer.
With Status Print, information is printed regarding the printer firmware version, various settings, and the status of consumables.
1. Load Letter or A4 paper.
2. On the Tab Selection screen of the Control Panel, press ? or ? to select Settings/Adj. tab
(If the Tab Selection screen is not displayed, press the Menu button.)
3. Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ? or ? to select Test Print, and then press the OK button.
5
Press ? or ? to select Status Print, and then press the OK button
Checking the information in Status Print reports:
The following information is included in Status Print Reports:
Canon imagePROGRAF iPFxxxx Status Print - Printer Model
Firm - Firmware version
Boot - Boot ROM version
MIT(DBF) - MIT database format version
MIT(DB) - MIT database version
S/N - Printer serial number
http://www.manualslib.com/manual/670378/Canon-Imageprograf-Ipf6400.html?page=657&term=serial#
4/27/2016 7:16:15 PM •
Canon...
•
44 views • 0 helpful votes
Not finding what you are looking for?