Canon imageCLASS - Recent Questions, Troubleshooting & Support - Page 5


Hi, probably a firmware malfunction or hard drive is defective

Canon imageCLASS... | Answered on May 05, 2018


there is dirty selenoid of paperbang, change the foam on selenoid with seal tape. and blow with air for clean dust of toner.

Canon imageCLASS... | Answered on May 03, 2018


there is dirty selenoid of paperbang, change the foam on selenoid with seal tape.

Canon imageCLASS... | Answered on May 03, 2018


This error is related to the fixing film engagement/disengagement, the black gear on the end which is also a sensor flag sometimes break, this usually requires a complete new fixing unit

Canon imageCLASS... | Answered on May 02, 2018


According canon support in this article: https://support.usa.canon.com/kb/index?page=content&id=ART105046, You will need to download the updated mf4150 firmware to prevent the occurrence of the E225 error Code.

Solution: (1) Turn the power off, (2) Replace the CIS Unit

Here you will find the direct link to download: http://www.canondriversoft.com/mf4150

Greetings and I hope to solve your problem

how to solve e225 error code-i5pszadi14d4a4tlx0e1accj-5-0.jpg

Canon imageCLASS... | Answered on Apr 27, 2018


hi, taht is a sowteare malfunction, in some cases reinstalling the firmware solve the problem, but it could be the image processor pcb ( Main electronic board) defective and need to be replaced

Canon imageCLASS... | Answered on Apr 24, 2018


the scanner problem. check the rail/way of scanner

Canon imageCLASS... | Answered on Apr 15, 2018


E301A failure in the exposure control of the scanning lamp.
try to remove - clean up - replace, I did it

Canon imageCLASS... | Answered on Apr 15, 2018


instal adobe reader on the pc

Canon imageCLASS... | Answered on Feb 27, 2018


Vista is not supported. Drivers for Win 8 to Win 10 are available and work 100%
Get Windows 10 and be happy again.

Canon imageCLASS... | Answered on Feb 15, 2018


Hi. That error indicates there is a problem with the counter board . Maybe is defective

Canon imageCLASS... | Answered on Jan 28, 2018


Code E100-0001 Description Error detection on any of scanner motor, laser unit, and BD detection at scanner area. Remedy When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
(1) Replace the Laser Scanner Unit.
(2) Replace the Engine Controller Board.

Canon imageCLASS... | Answered on Jan 26, 2018

Not finding what you are looking for?

-1,103 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2279 Answers

Ekse

Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Forum

View Most Popular

  • Canon Office Equipment & Supplies
Loading...