Canon PowerShot - Popular Questions, Answers, Tips & Manuals - Page 4

If it's still under warranty, go to Canon's website and arrange for a repair.

The repair was made some nine years ago. This suggests that the camera is way beyond its expected life span - retire it, and purchase another.

Camera needs service

So your power shot has gone south. Shame because they are really good cameras. Unless it is a very ex[pensive model repair is never cost effective.

just down load it and then you click on the downloaded file and it should install the software. the link below will automatically detect the windows operating system you are using if you are using windows https://www.usa.canon.com/internet/portal/us/home/support/details/cameras/support-point-and-shoot/powershot-sd-elph-series/powershot-sd850-is?tab=drivers_downloads

Liquids and electronics do not mix. Replace the camera

The exposure meter in your camera is underexposing due to the white background. Try adding up to two stops of positive exposure compensation. What you are seeing as blue is in fact grey - it may be an idea to calibrate your monitor as well.

This camera is 'broken' - repair will be expensive, so replacement may be better, especially as technology has moved on somewhat

Use GOOFOFF cleaner

Could you have sent a RAW image? Try sending a jpeg.

I would look at the connection ports. Sometimes dust,dirt gets in there..Try blowing air into the connectors. You can use you mouth breath but a small air compressor works better..But I wouldn't over do it with to much air pressure... My iPhone mic was dirty...No one could hardly hear me...I done this and now they hear me good...Worth a try...It could bent prongs in the port or a bad cable. Good luck.

Check to see the largest capacity card that the camera will accept - if you are trying to use cards larger than this, I would expect this error.

Those lenses have very small gears and motors. It would be best if you sent it in for repairs. WWW.unitedcamera.com

Problems with the ccd sensor.

Use a USB card reader on your computer.

The fall was probably sufficient to damage some of the delicate componentry contained within the camera

Possibly data is corrupted - format card in the camera

Try doing a factory reset.

http://www.pc4cracked.com/2017/07/superantispyware-professional-v6-0-1244

Send it back and tell them to do an extended test of ALL functions until they see your problem