Cannon Kitchen Ranges - Page 5 - Recent Questions, Troubleshooting & Support

The FFD or it might be called an FSD in cannons case is faulty it needs replacing. The fault is that it is not forcing open the valve to let teh gas come through when it gets hot... These are easy to fit if you know what your doing .... Be careful it is a corgi man job. Flame faliure device or flame saftey device.... 100 %

Thanks for your question!

I'm sorry that you haven't received an answer yet.

The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...

Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.

Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

HelloReplace battery.It's similar to a watch battery found at the base of the cooker front.You will need a flathead screwdriver to open casing.Good luck.

Go to Cannon website. Have model # and serial#, and look it up.

You need a C.O.R.G.I. (soon to be re-named "gas safe" in april) engineer qualified for LPG to sort this.

Check for contamination or grease in the burner holes. Also gas pressure could have gone out of adjustment.

Of course....insurance...

Not familiar with this particular range oven but the thermostat should look like a longinsh cylindrical closed end metalic tube. You may have to raise up the cooking surface to run the wires for a new thermostat. If your oven is cooking to high or too low you can try taking the bake temp control off the know and see if there is a fine adjustement for temperature. I use a temp probe with a very inexpensive Sears DVM (about 20 bucks at Sears) to adjust mine. You should give the oven a good 1/2 hour to heat up and another 1/2 hour between each adjustment. Remember, the oven temp will swing high and low to maintain the set temp. Hope this helps!

Go to www.cannonservice.co.uk/hs/pages/manual/manualSearch.do you should find your model there. Terry.

how do i take the cooker off auto?