Televison & Video - Page 6 - Recent Questions, Troubleshooting & Support


Use the App Search feature.

JVC Televison &... | Answered 3 days ago


Hello, again, Garth -

You may find this article about reporting problems with Showmax informative:
https://mybroadband.co.za/news/broadcasting/144045-showmax-not-working-right-this-is-how-to-report-problems.html

The article gives an email address you can use to report problems you have with Showmax.

Best wishes.

Televison &... | Answered 3 days ago


There have been issues with firmware, if that is the case they should offer a method to reverse the process instead of telling you to press a few buttons which will do nothing. I would pursue Panasonic to get them to offer you a solution to remedy the matter.

Panasonic... | Answered 3 days ago


works on the BDP 2700 -
turn on player without disc. push home button(looks like a house) on remote. enter 1389310 using remote. wait 10 sec then turn off at front of player. wait 10 sec then turn on at front of player.

I believe the 7200 is not able to be unlocked for region free play though

Philips... | Answered 3 days ago


One of the possible reasons is that your Blu-ray player is unable to read the disc. Check to make sure the inserted disc is clean and not scratched on the playing side. If so clean the surface of the disc or use an alternative Blu-ray disc to verify. ... Only Region B Blu-ray discs and Region 4 DVDs are compatible.11 Oct 2017

Blu-ray Player cannot play discs - Samsung

www.samsung.com/au/support/skp/faq/1045337 blu ray stops payling Google Search

Sharp BDHP20U... | Answered 3 days ago


It sounds like the bluray laser is worn out. Try cleaning the lens with a Blu-ray lens cleaner. If that dosen't help it might be the blu-ray laser it self. The laser is dead. If you are under warranty the call the manufacture for service. Shop around for current retail prices. Bluray players have gone down alot and it might be better to go ahead a buy a new player.

Panasonic... | Answered 3 days ago


If you want to eject the CD you need to look on the front of the Blu-Ray drive for a small hole, about the size of a pencil-lead. If you open a paper clip and insert it, it should pop the drive open for you.

Televison &... | Answered 3 days ago


Some DVD players are proprietary. See if it will play in other devices. If it is a burned copy the player may not like that brand of DVD.

Philips... | Answered 3 days ago


see the cause and remedies:
Does not play disc
  1. No disc. - Load a disc into the tray.
  2. Disc has been loaded upside down. Place the disc with the label side up.
  3. Disc region code does not match region code of the player.
  4. Disc type is not the correct type to play.
  5. Disc is damaged or dirty. Clean the disc or try another.
  6. Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours.
Finally the OPU, optical pickup unit contain too the lasser beam, NOT are reading the TOC of disk,+Syscon can be defective. You must go to the repair shop TV for fix it. this a complex equipment.
see tje block diagram.
God bless you
7_17_2012_11_40_12_am.gif

Sony BDP-S300... | Answered 3 days ago


Try a different disc, one that worked before if problem still persists try and buy a lens cleaning disc that should solve your problem. If not, your optical laser head needs replacing.

Coby Televison &... | Answered 3 days ago


my remote is kevin rm-133e for sanyo code plsss

Universal Remote... | Answered 3 days ago


In order to play a bluray video disc without a remote, it must skip the menu and automatically play the video. The only way to accomplish this is to burn the disc this way, or it must come like this from the factory, and in most cases it doesn't.

The alternative is to press the play button on top of the disc player. Hope this helps!

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Samsung BD-P3600... | Answered 3 days ago


Doubtful. If the drive won't read them, it may just be the brand on disk that is preventing it. Changing software settings won't improve anything if the drive in the computer can't read the disk.

GoVideo Go Video... | Answered 3 days ago


Hi...
The laser goes thru a different lens arraignment for DVDs.
Take it to a TV shop and have them "blow out" the laser assembly with some CO2 and clean the lens.

Sony DVP-CX985V... | Answered 3 days ago


Model number of the DVD player would really help...\
Bill

Televison &... | Answered 3 days ago


I had the same problem with my recorder except that it wouldnt play any discs at all.. I finally unplugged the recorder and left it unplugged for 16 hours. Now it is fine. I am not getting any error messages.

Toshiba D-VR4... | Answered 3 days ago

Not finding what you are looking for?
Televison & Video Logo

651,973 questions posted

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...