Refrigerators - Page 4 - Recent Questions, Troubleshooting & Support


We have our ongoing villa projects in Thrissur with high-quality luxurious amenities and we also faced this situation. then searched for a better repairman.
Check out the below link for more details:

https://www.tbpl.in/monsoon-tips-home/

Refrigerators | Answered on Jan 09, 2020


Hello Dennis;

My name is Peter. I am a retired field service technician.

You did not provide a model number. So, I am going to speak in general. It sounds like you have a bad or stuck contact switch. Or, you ice dispenser handle is broken and activating the dispenser.

You contact switch will look like the following:


25331098-tf0pl124dzd5m1czyqgpxhkh-4-0.jpg

There are two slots on the bottom of the dispenser frame for a flat head screw driver. Pop the bottom out. The rest of the frame is held by plastic tabs. Push in the sides to remove the frame.

Ground yourself by touching something that is steal. Static electricity will knock out a board. Remove the board. You will see the contact switch.

Send me the model number and I can be more specific.

Go into the following web site and put in your model number for diagrams and the part number.
Water Filters Lawn Garden Appliance Parts

Amana... | Answered on Jan 08, 2020


Good Afternoon Friend,

I understand that your Frigidaire refrigerator, model# FFHS2611LWF, is flashing an "H1" code. This is actually stating "HI", as in either the refrigerator or freezer, temperatures are Hi and not at a safe level. First, press any button to stop the alarm and clear the HI temperature. If you are still receiving the alarm, I suggest checking the freezer, to make sure that everything is still frozen, and nothing is defrosting as, well as checking the refrigerator temperatures. If things are defrosting or the temperature is Hi in your refrigerator, I suggest resetting your appliance, by either unplugging it or shutting the power off at your homes circuit breaker, for 3-5 minutes. When power is restored, Give your freezer 24 hours to stabilize at the default temperatures of 0 degrees for the freezer and 37 degrees for the refrigerator. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your refrigerator status has changed successfully.

-Best Regards-
WP

Frigidaire... | Answered on Jan 07, 2020


Theres n info tag somewhere. If its gut issues w compressor etc..it cost uless to buy used or new

Refrigerators | Answered on Jan 07, 2020


Turn off the refrigerator and remove the power cord from the wall socket.
Unscrew the thermostat / dial and gently pull it out of it's holder....
There is a tiny pipe on the back of the thermostat / dial.
Gently pull that tube out of the pipe that it is in.
The most likely reason for the lack of cooling is that there is a layer of gunk on that tube.
Take coarse cloth or pot scrubber and clean that tube gently...
Replace the tube in the pipe and see if refrigerator runs properly....
If not, new refrigerator needed....

Regards
Geoff

Danby... | Answered on Jan 06, 2020


oddly without any testing we will never know

Refrigerators | Answered on Jan 06, 2020

Not finding what you are looking for?
Refrigerators Logo

173,093 questions posted

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Brad Brown

Level 3 Expert

18157 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...