Lands Phones - Page 9 - Answered Questions & Fixed Issues

Question edited for clarity and typo. No, only those phones, as they are part of a system. https://dcomcomputers.com/samsung-prostar-824-black-digital-phone/ ..

Contact your telco. It is a feature supplied by them.

To save caller ID with a name in Panasonic KX-AT7730, you need to follow these steps: Press the "Program" button on the phone. Dial "9" to enter the "Caller ID" setting. Dial "1" to enter the "Caller ID Memory" setting. Dial the memory location number (0-99) where you want to save the caller ID and name. Enter the caller's phone number using the keypad. Press the "#" button to move to the next field. Enter the caller's name using the keypad (use the alphanumeric keys to enter letters). Press the "#" button again to save the entry. Repeat steps 4-8 for each caller ID you want to save. Note: Caller ID service must be enabled on your phone line for this feature to work. Also, make sure you have enough memory locations available in your phone's memory to save new caller IDs.

try to check the miss call feature if you have in menu.... some other panasonic have this

Since you didn't specify the model of your VTech DECT 6.0 phone I can't give you a definite answer, but many of them have a "mute" button on the handset. Enter the model of your phone into the search box here to download a copy of the manual.

The Uniden D-1680 system can have up to 12 handsets registered to the base. (The phone system was sold in bundles with 0 to 11 accessory handsets.) However, this cordless phone system has been discontinued. I can only find used DCX160 handsets (the compatible accessory handset) on Amazon and E-bay. I hope this helps. Cindy Wells

It sounds like there might be an issue with your Aria SOHO phone system's incoming call settings or configuration. Here are some steps you can try to troubleshoot the issue:

1. Check the volume settings: Make sure that the volume on your Aria SOHO phone system is turned up and not set to mute. You can do this by pressing the volume up button on the phone or checking the volume settings in the phone's menu.
2. Check the ringer settings: Make sure that the ringer is enabled for incoming calls. You can check this by accessing the phone's menu and looking for the ringer settings option. Make sure it is set to "On" or "Enabled."
3. Check the incoming call settings: Check the incoming call settings on your Aria SOHO phone system to ensure that calls from outside are set to ring through to your phone. This can usually be done by accessing the phone's menu and navigating to the call settings or call routing options.
4. Check the cables and connections: Make sure that all cables and connections between your Aria SOHO phone system and the outside phone line are secure and properly connected.
5. Restart the phone system: Try restarting your Aria SOHO phone system by unplugging it from the power source and plugging it back in after a few seconds. This can sometimes help reset the system and resolve any software or configuration issues.

If none of these steps work, you may need to contact a professional technician who is familiar with the Aria SOHO phone system to help diagnose and fix the issue.

It is possible that the outside lines have been blocked in the programming of the Samsung IDCS 28D system. You can try the following steps to unblock the outside lines:

1. On a phone that is working, press the TRANSFER button and dial 200.
2. Enter your system password. If you don't know your system password, you may need to contact your phone system administrator or service provider.
3. Press 713 for "Line Block Release".
4. Press the button for the line that is blocked (in your case, all 4 lines).
5. The display should show "RELEASE OK" for each line that is unblocked.
6. Hang up the phone.

If this doesn't work, it is possible that the phone system may need further troubleshooting or programming by a technician.

To unblock the outside lines on a Samsung IDCS 28D system, you can follow these steps:

1. Press the "Transfer" button on your phone.
2. Dial "741".
3. Press the "Transfer" button again.

This should unblock the outside lines on your system. If this does not work, you can try resetting the system by unplugging it for a few minutes and then plugging it back in. If the issue persists, you may need to contact a professional to troubleshoot the system further.

It's possible that when you cleared the forward on no answer, the voicemail setting on your Samsung iDCS 28D was not properly restored. Here are some troubleshooting steps you can try:

1. Check your voicemail settings: Dial 604 and press the "Speaker" button. Enter your extension number and press the "Speaker" button again. The system should confirm that you have entered the correct extension number. If it does not accept your extension, try dialing from a different phone to make sure that your extension is still active.
2. Verify your call routing: Dial 601 and press the "Speaker" button. This will show you the current call routing for your extension. Verify that "No Answer" is set to go to your voicemail box. If it is not, you can change it by pressing the "Speaker" button and entering the appropriate code for voicemail (usually "72").
3. Restart the phone system: If the above steps do not work, try restarting the phone system. You can do this by unplugging the power cable from the phone system for a few seconds and then plugging it back in.

If none of these steps resolve the issue, you may need to contact your phone system administrator or IT support for further assistance.

To reset the password on your Comdial 7260 00 voicemail, follow these steps:

1. Dial the voicemail extension from your phone.
2. When prompted, enter the default password. The default password is usually "0000" or "1234".
3. Follow the prompts to change your password. If you are not prompted to change your password, press "9" for the mailbox options menu, then "8" for the password menu.
4. Enter your new password when prompted. Make sure to choose a secure password that you can remember.
5. Confirm your new password when prompted.
6. Hang up the phone to save your changes.

If you are still having trouble resetting your password, you may need to contact your voicemail administrator or Comdial customer support for further assistance.

The issue with the *361 code not working on your Panasonic KX-TDA100 could be due to a few reasons:

1. The code may not be enabled in the DISA feature settings. You can check the DISA feature settings to ensure that the code is enabled for OGM recording.
2. The code may be conflicting with another code or feature on the system. Try using a different code for OGM recording, such as *38 or *391.
3. There may be a hardware or software issue with the system. In this case, you may need to contact Panasonic technical support or a certified technician to diagnose and resolve the issue.

It's also worth noting that different Panasonic phone systems may have different codes and settings for OGM recording, so be sure to consult the user manual or technical documentation for your specific model.

There could be a few different reasons why this is happening. Here are some things you can try:

1. Check the extension settings: Make sure that the extension in question is set up correctly in the NEC SL1000 system. Double-check the extension number, ringing pattern, and other settings to ensure that they are all correct.
2. Check the phone: Try swapping out the phone itself to see if the problem is with the phone rather than the system. Test the phone on another extension to see if it behaves the same way.
3. Check the wiring: Make sure that the wiring for the extension is correct and that there are no loose connections or broken wires. Check the wiring all the way back to the PABX.
4. Check the programming: Check the programming of the system to make sure that there are no conflicts or issues with the extension in question. Look for any programming errors or conflicts with other extensions.
5. Check for system errors: Check the system logs for any errors or messages related to the extension in question. Look for any error messages that might indicate a problem with the system or with the extension itself.

If none of these steps resolve the issue, it may be necessary to contact NEC technical support for further assistance.

To use a headset with the NEC etw-16dc-2, you should plug the RJ9 connector into the headset jack on the back of the phone. Once you have connected the headset, you will need to activate it for use by pressing the Headset key, which is typically located on the bottom row of keys on the phone. If there is no specific Headset key on your phone, you can try pressing the Speaker key to activate the headset. If you are still unable to use the headset, you may need to check the settings on your phone to ensure that the headset is enabled and configured correctly.

To retrieve messages from the RCA Telefield model 1000 answering machine, follow these steps:

1. Press the "play" button on the answering machine. You will hear a beep and the machine will start playing your messages.
2. Use the "skip" and "repeat" buttons to navigate through your messages.
3. To save a message, press the "save" button. To delete a message, press the "delete" button.
4. If you want to keep a message, write down the date and time of the message and the caller's phone number.

If you are having trouble retrieving messages or the answering machine is not working properly, you may need to reset it. To reset the RCA Telefield model 1000 answering machine, unplug it from the power source for a few minutes and then plug it back in. This should reset the answering machine and clear any issues.

If an extension light on your Samsung OfficeServ DS-5038S phone is flashing red and dialing the extension gives an engaged tone even though no one is using the phone, it's possible that the extension is stuck in a busy or engaged state. Here are some steps you can try to resolve the issue:

1. Check the extension: Go to the extension in question and make sure the handset is on the hook and that there are no other phones or devices using the line.
2. Restart the phone: Try restarting the phone by unplugging it from the power source for a few seconds, then plugging it back in.
3. Check the programming: It's possible that there is an issue with the phone's programming. Check the phone's user manual or contact your phone system administrator to ensure that the extension is programmed correctly.
4. Check the phone system: If the issue persists, it may be necessary to check the phone system itself for any issues that could be causing the extension to appear busy or engaged.
5. Replace the phone: If none of the above steps resolve the issue, it's possible that there is a hardware issue with the phone itself. Consider replacing the phone or contacting a qualified technician for further assistance.

It's important to note that some phone systems are configured to automatically put extensions into a busy or engaged state after a certain period of time to prevent unauthorized access. If this is the case, contact your phone system administrator to adjust the settings accordingly.

A steady blue light on your NEC-SL1000 system usually indicates that the system is in standby mode. However, the lack of a dial tone on all local lines indicates a problem with the system or phone lines. Here are a few steps you can try to troubleshoot the issue:

1. Check the phone lines: Make sure that all phone lines connected to the system are properly connected and not damaged. If you have multiple lines, test each one individually to determine which line is causing the issue.
2. Restart the system: Turn off the system and unplug it from the power source. Wait for at least 10 seconds before plugging it back in and turning it on again.
3. Reset the system: If restarting the system doesn't work, you may need to perform a system reset. Refer to your user manual for specific instructions on how to reset your NEC-SL1000.
4. Contact a professional: If none of the above steps work, you may need to contact a professional NEC-SL1000 technician to diagnose and fix the issue.

It's also possible that the steady blue light is indicating a different issue altogether. Again, refer to your user manual or contact a professional for further assistance.

https://www.google.com/search?q=kxt-2838+manual ..

Tengo telefono Panaphone kxt-2838LM, antiguo, agotado, pero muy bueno en su funci?n. Perd? manual de instrucciones de uso. Podr?a env?armelo por Gmail: gracias [email protected]

If the backlight of your Panasonic KX-TGA750C phone is on, but the LCD display does not come on, the most likely cause is a faulty LCD screen. This could be due to damage from physical impact, moisture or water damage, or simply wear and tear over time. One thing you can try is to reset the phone to its factory settings. To do this, remove the batteries from the phone and unplug the base station for a few minutes. Then, reinsert the batteries and plug in the base station again. This may reset the phone and fix any software or firmware issues that could be causing the problem. If resetting the phone does not work, you may need to have the LCD screen replaced. This can be done by contacting Panasonic customer support or a professional electronics repair technician.