Lands Phones - Page 8 - Answered Questions & Fixed Issues

Hi Sherry,To disable the voicemail on your Motorola CD4 landline, you will need to contact your landline service provider and request that they disable the voicemail feature on your account.The process of disabling voicemail may vary depending on the service provider, but typically, you can do this by calling their customer service hotline or by logging in to your account online.Once you are connected with a customer service representative, explain that you want to disable the voicemail feature on your account. They may ask for verification of your account information and may need to make changes on their end to complete the process.It's also worth noting that disabling voicemail means that the callers will no longer be able to leave you a message when you are unavailable. So, make sure you consider this before making a final decision to disable voicemail.

That would have been programmed when the system was installed. It is done from the control box not from a phone. The technicians connect a laptop to the serial port on the box and program advanced features that way using proprietary programming software from Panasonic. That is how my hotel system was done. Sometimes you can do it from the reception phone which is the main phone nearest the box, but there is no programming manual available. https://www.google.com/search?q=panasonic+kx-dt521+programming+manual ..

https://support.itel.com/hc/en-us/articles/202724885-Restore-an-Aastra-Phone-to-Factory-Defaults

Question edited for a lot more clarity. Question moved from Cellphones to correct category. Manuals and Programming Modes explained. https://www.google.com/search?q=nec+sl2100+mlt+modes+explained ..

The E02 error code on a Russell Hobbs 24320 coffee maker typically indicates an issue with the heating element or temperature sensor. Here are a few things you can try to troubleshoot the problem:

1. Make sure the coffee maker is properly plugged in and turned on.
2. Check the water reservoir and ensure it is filled to the correct level.
3. Clean the machine thoroughly, including the water tank, filter basket, and carafe.
4. Check the heating element and temperature sensor for any signs of damage or corrosion. If you notice any issues, you may need to replace these parts.
5. Try resetting the coffee maker by unplugging it for a few minutes and then plugging it back in.

If none of these steps work, you may need to contact Russell Hobbs customer service for further assistance or to arrange for repairs.

Contact the maker service department or local dealer. We don't do heavy equipment at Fixya. Service manual https://www.google.com/search?q=Liebherr+model+974+excavator.+The+swing+not+working ..

Quick Reference Guide. The full programming manual is being elusive. Contact details on the last page though. https://www.ask-tsc.com/pdf/KX-T77xx.pdf https://www.google.com/search?q=panasonic+kx-t7731+programming+manual

Question edited for clarity. Question moved from Misc. You pressed the MUTE button.

here is link to manual copy and paste https://www.ask-tsc.com/pdf/KX-TA824.Operating%20Manual.pdf

See pages 26 and 27 of the manual ("Selecting a base station/Enrolling a handset") at https://www.manualslib.com/manual/1211269/Detewe-Beetel.html?page=29#manual You will need the "PARK" number on the bottom of the base unit, or, if there aren't any other base stations within range (~ 60-600 meters, depending on building environment), at least the last four digits of the PARK.

Does this phone system have a central server? If so I would go check to see that it has power and came back up after the power outage. A lot of phone servers are on a battery backup and when the power goes out the software tells the server to shut down and then the UPS powers off.

Contact Argos. Ask if they will replace or repair under warranty. They are cheaply made and not built for longevity. https://www.google.com/search?q=Binatone+1315 ..

To turn off the second alarm on the RCA Digital PLL radio model RP3711A, follow these steps:

1. Press and hold the "Alarm 2" button on the top of the radio until the display shows "OFF."
2. Release the button.
3. Press the "Alarm Set" button to confirm that Alarm 2 has been turned off. The display should no longer show the time and alarm settings for Alarm 2.

If turning off Alarm 2 using the above steps doesn't work, you can try resetting the radio to its factory settings. To do this, follow these steps:

1. Unplug the radio from the power source.
2. Remove the backup battery from the radio.
3. Wait at least 30 minutes.
4. Reinsert the backup battery and plug the radio back in.
5. Set the time and alarm settings again.

Regarding the manual, the model RP3710 and RP3712 may have similar features and operation, but it's best to refer to the manual specifically designed for your radio model RP3711A to ensure that you are following the correct instructions. You can usually find the manual online by searching for the model number on the RCA website or on other electronic manual databases.

The steps to delete auto attendant messages, including day/night mode, opening inbox, schedule 1, schedule 1 intervals A/B/C, will depend on the specific phone system or software you are using. However, here are some general steps you can follow: Access the auto attendant menu: This is usually done by dialing a specific extension or accessing the system through a web-based portal. Navigate to the message management section: This section may be labeled "Greetings," "Prompts," or "Recordings," depending on your system. Select the message you want to delete: This may involve listening to the message or selecting it from a list. Choose the delete option: This may involve pressing a button or selecting a menu option. Confirm the deletion: Some systems may require you to confirm the deletion before it is finalized. Repeat for all auto attendant messages you want to delete. It's important to note that deleting auto attendant messages may affect the functionality of your phone system

here is a link to instructions copy and paste https://cdn-media.vtechphones.com/products/CS/CS5119/CS5119-X_WEBCIB_V3_20160308.pdf

The instructions say you change them using the answer phone menu in the base - you need to scroll to 'answer delay' and you can increase the rings to a maximum of 8

Yes, the Panasonic KX-T7667 phone and the Panasonic KX-TES824 PBX are compatible. The KX-TES824 should be able to accommodate different handsets because it is made to work with a variety of Panasonic phones, including the KX-T7667 model. You must connect the KX-T7667 phone to an available extension port on the PBX and configure it with the proper parameters using the PBX programming software or a web interface in order to add the phone to your current PBX system. It's vital to keep in mind that the KX-T7667 is a proprietary phone made just for Panasonic PBX systems and might not work with other phone systems or third-party hardware.

To program the calls to go to the new location with the same extension number on a Nortel Networks T7316 phone, you will need to update the call routing information in the phone system's programming. Here are the steps you can follow:

1. Access the programming mode on the phone system. This typically involves entering a password or code on the phone's keypad.
2. Locate the call routing configuration for the extension in question. This may be in a menu for "extensions" or "call routing," depending on the specific phone system.
3. Edit the call routing information to reflect the new location of the extension. This may involve specifying a new phone number, a new group or queue, or a new set of forwarding rules.
4. Save the changes and exit the programming mode.

Once you have completed these steps, incoming calls should be routed to the new location of the extension, even though the extension number remains the same. Note that it may take some time for the changes to propagate through the phone system, so it is possible that calls may still go to the old location for a brief period of time after the changes are made.