Audio Players & Recorders - Answered Questions & Fixed Issues


Seems a common issue and is termed 'a garbage receiver'. See videos and fixes

https://www.google.com/search?q=audio+chip+for+Onkyo+receiver

Onkyo Audio... | Answered 3 hours ago | 14 views


After connecting one, turn on the other. Then while both are powered on? Press and hold the button on both earbuds until they connect to one another.

Audio Players &... | Answered 9 hours ago | 43,490 views


many times the unit needs to be cleaned .

Sony CMT-NE5 CD... | Answered 21 hours ago | 561 views


There are two types of sub. The first is the powered type. This has a socket that connects via a cable to your amp socket - marked sub out. Some amps have the abillty to switch this socket on or off and comtrol the output. The sub itself is mains powered.
The other sub is none powered. This requires the speaker cables to be connected to it, the bass being extracted from them, before passing the signal on to the speakers

Audio Players &... | Answered 2 days ago | 59 views


Those are usually hermetically sealed. You will damage the housing if you try to replace it..

Bose Audio... | Answered 2 days ago | 13 views


Depends on a receiver model. So it is a bit hard to answer the quesition if you don't provide some more specific information.

Audio Players &... | Answered 2 days ago | 48 views


Hi have Sony STR-AV 970 not getting any sound from receiver panel lights up, and the FM
Station is up and running but no sound from either A/B speakers as well as the phones

Sony Audio... | Answered 3 days ago | 52 views


I believe it's the Speed sensor inside the motor drive case. The Part number on my sesor is Sharp 1A35R. It's a sensor that tracks the platter speed. If I replace the whole motor PCB with a good one then the turntable works just fine. I ordered a couple 1A35R from Ebay and hopefully that will solve the problem.
https://media.digikey.com/pdf/Data%20Sheets/Sharp%20PDFs/GP1A35RV.pdf

Numark TTX1... | Answered 3 days ago | 385 views


Hello Dear,
While trying to fix a corroded switch on my D50 I managed to break the lcd so If you have a dead d50 I am looking to buy one for parts. Please if you are interested contact me at spogos@gmail.com
Thank you for your time!

Sony PCM-D50... | Answered 3 days ago | 58 views


Connect it up right, Buy useing a audio patch cord,

Audio Players &... | Answered 3 days ago | 533 views


http://www.multiregionupgrades.com/

Audio Players &... | Answered 3 days ago | 1,196 views


TZUMICLOCK LED Speaker Clock Charging Pad User ...

Jan 18, 2018 - LED Speaker Clock Charging Pad User Manual details for FCC ID ... the user manual carefully before using Tzumi Clock Charging easily and saving ... Start Guide: Dear Users, We sincerely appreciate your choice of our Bluetooth speaker. ... Alarm clock setting and mode change (like from Bluetooth to FM ... tzumi.com > pages > manuals

ALL Manuals - Tzumi.com

TRADEMARKS OWNED BY BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKVS BY TZUMIĀ® IS UNDER LICENSE. SUBJECT TO CHANGE WITHOUT ...

The Audio... | Answered on Jan 20, 2020 | 24 views


Just fixed my PV1000 that would not power on. Verified 185vdc on bulk capacitors. Measured 11vdc on U5 (UC3842) from pin 5 (gnd) to pin 7 (vcc). Then measured 0vdc from pin 5 (gnd) to pin 8 (ref). This should be 5vdc. This means that U5 is shut down for undervoltage. Turned out to be two open resistors. R94 100k 2w and R77 33k 2w. Never would have guessed that as there was no sign of heat discoloration. They are next to each other between U5 the UC3842 PWM IC and Q3. This prevented the proper startup voltage for U5. Replaced them and I'm off and running once again. Hope this helps someone.

Boston Acoustics... | Answered on Jan 20, 2020 | 705 views


https://manualsbrain.com/en/brands/memorex/popular_categories/

http://www.manualsbase.com/es/brand/details/3849/memorex/

Memorex Audio... | Answered on Jan 20, 2020 | 18 views


The F76 message indicates a fault in one of the internal outputs on the power supply. There aren't any settings or resets that will fix this, and the Panasonic will require service.

http://eng.faq.panasonic.com/app/answers/detail/a_id/26132/~/troubleshooting---error-code%2Fmessage-f76

Maybe helps:
https://www.badcaps.net/forum/showthread.php?t=59839

Panasonic Audio... | Answered on Jan 20, 2020 | 19 views

Not finding what you are looking for?
Audio Players & Recorders Logo

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

Ekse

Level 3 Expert

13434 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...