Audio Players & Recorders - Page 6 - Recent Questions, Troubleshooting & Support

Hi Madhu, I am a bit confused with your questions. If this has not been resolved for you please give us a call at 800-229-1687 as our Product Support Team is ready to assist 24/7, Thanks, JT

Onkyo Audio... | Answered on Jan 12, 2020

Tip & How-To about Miscellaneous
Pairing Bluetooth Devices
Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks.

Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is.

Roughly speaking though.

Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever.

With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically.

When the Android device recognises it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes).
Posted by Andrew... on Nov 19, 2016

iHome Audio... | Answered on Jan 11, 2020

Take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manuals

The Audio... | Answered on Jan 11, 2020

The solution I found to reset the hard drive. Follow these procedures:
1. Remove the battery.
2. Unscrew the 2 screws on the right side of the battery compartment.
3. Loosen the 4 screws on the other side of the unit, but be very careful not to take them out, leave part of the screw in the hole, because if you don't, you'll have a hard time putting them back later as I found out. Now I have one loose screw on the bottom left.
4. Open the back cover carefully and make sure the 4 screws on the side are still intact. Adjust these screws if you have to but make sure they don't come all the way out. After opening the cover you'll see the hard drive and you'll probably see the connecting cable is loose. Lift out the hard drive and tighten the cable.
5. Replace the cover, tighten all the screws, and you are set.
After that, my 604wifi was able to start up normally and the recovery message is gone. A new problem now is the unit will turn off by itself after about 20 seconds. I suspected it was because of the loose screw, but I just don't have the time to fool with it now, well...future project.

Archos 604 WiFi... | Answered on Jan 11, 2020

Not finding what you are looking for?
Audio Players & Recorders Logo

321,873 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts


Level 3 Expert

13434 Answers


Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides