Office Equipment & Supplies - Page 3 - Answered Questions & Fixed Issues
Hp 7500a "The following ink cartridges appear to be missing or damaged"
I figured out the problem with my printer. If none of your ink cartridges are detected (missing) then follow the install steps below.
1. Turn on printer
2. After printer declares cartridges missing open the printer and remove the cartridges (advise putting a piece of paper under the cartridges to catch any ink that spills).
3. Turn off the printer (keep the top of the printer open)
4. Turn on the printer (still with the top of the printer open)
5. After the printer declares the cartridges missing again install the cartridges (while the printer is powered on). Close the top of the printer.
6. The printer should begin to cycle the ink into the printer and back out to the ink reservoirs.
7. After the ink cycle the printer should display genuine ink cartridges are installed
8. Make sure paper is in the tray so the printer can perform an alignment.
9. Everything should be ok after that.
Chad
What is the fiscal size of Fellowes shredder?
Question edited for clarity, spelling of 'Fellowes'.
I don't think 'fiscal' means what you think it means?
=============================================
fis·cal
/?fisk(?)l/
adjective
-
relating to government revenue, especially taxes.
"monetary and fiscal policy"
=========================================
Fellows does all sizes of shredders up to Office Quality machines that will also Crosscut shred credit cards and CDs.
https://www.google.com/search?q=Fellowes+shredders
..
My register is only printing on half paper
Assuming you have the correct thermal paper in the register, here is something to try:
The SPS-320 has an electronic journal that can be printed to memory rather than live on paper.
To print the journal entries, follow these steps:
Turn off the register.
Hold down the "Journal" button (usually located on the keyboard).
While holding the button, turn the register back on.
Release the button. The journal entries should now print.
Check for Errors:
Review the register's display for any error messages or codes.
If there are error messages, consult the user manual or seek professional assistance.
Contact Support:
If the issue persists, consider reaching out to Sam4S customer support .
4/11/2024 6:46:02 PM •
The Office...
•
Answered
on Apr 11, 2024
•
18 views
Casio fr-2650 plus is showing an E on the screen
Follow theses steps (from Casio Support) :
First, check the batteries, and ensure there is not a paper jam in the printer.
If both are fine, then while the calculator is in the "Print" mode, press the [CA] (or [AC]) button 20 times consecutively to clear out memory buffers. Try some numerical calculations, and if the problem persists, repeat pressing the [CA] button 20 times.
If the problem still persists, then the calculator may require service
4/11/2024 5:04:35 AM •
Casio...
•
Answered
on Apr 11, 2024
•
1,303 views
Not finding what you are looking for?