Measuring Tools & Sensors - Page 5 - Recent Questions, Troubleshooting & Support

the t bevel is good for replicating any angle. Been a carpenter for 20 plus years and the tool is priceless

Have you changed the filter on the system?

Might replace the battery?

We have sokkia total station cx105c giving error code E880 as switch on instrument. Please give a solution

Question edited for clarity. Question moved from Office Equipment category. There doesn't seem to be any manual online or on their website. They assume if you have micrometer, you know how to use it. Ask them if they have a manual. https://www.starrett.com/about/contact-us https://www.google.com/search?q=Starrett+823C+manual

check settings, You could bypass softener for a day and night and if regenerates it is defective and should be replaced. Do you have any dripping faucets or leaking water heater.

To calibrate the scale on Robinair 34288, follow these steps:

1. Turn off the machine and make sure that the scale is empty.
2. Press and hold the "Weight" button for three seconds until "CAL" appears on the display.
3. Place a weight of known mass (such as a 50-pound weight) onto the scale and press the "Weight" button. The display will show the weight that you placed on the scale.
4. Press the "Weight" button again to confirm the weight. The display will show "CAL END" to indicate that the calibration is complete.
5. Remove the weight from the scale and turn the machine back on.

Your Robinair 34288 scale should now be calibrated and ready to use. If you have any issues or concerns, please consult the user manual or contact Robinair customer support.

probably needs to be recalibrated

Question edited for clarity, full 'make model (what is is)'. Question moved from Cars and Trucks to make model category. Link to Parts supplies and the maker. They ought to replace it as a warranty item. https://www.google.com/search?q=spectra+precision+laser+ll500+parts https://www.spectraprecision.com/product-support ..

Various similar Radio Shack indoor outdoor thermometers, but not yours. Probable close enough though. https://www.google.com/search?q=Radio+shack+63-1024+manual ..

Question edited for a lot more clarity. Question moved from Cars and Trucks. https://www.google.com/search?q=Ramset+J20+firing+pin Ramset J20 parts and repair video https://www.paslode.co.nz/schematic-au/zz-historical-retired-ramset-tool-schematics-no-parts-support/powder-actuated-no-support/409-j20-j20s-ramset-au/file

They are still being sold and one of the sites here says it has the software as a download. https://www.google.com/search?q=jdsu+validator-nt+955+software+download& ..

Not much online. Contact the maker direct. https://www.google.com/search?q=taylor+1574-21+thermometer ..

Sure, I'd be happy to help you recalibrate your Super Pro moisture meter. Here are the steps you can follow:

1. Find a reference sample: You will need a sample of maize that has a known moisture content that is different from the current reading on your moisture meter. You can either purchase a certified reference sample or make your own by drying a sample of maize in an oven or using a moisture analyzer.
2. Adjust the calibration: Turn on your Super Pro moisture meter and press the "calibrate" button. Using the reference sample, adjust the calibration of the moisture meter by adding or subtracting the required percentage points to match the known moisture content of the reference sample. For example, if the reference sample has a moisture content of 14% and your moisture meter is reading 16%, you will need to subtract 2% from the calibration.
3. Verify the calibration: After adjusting the calibration, test the moisture meter again using the reference sample to verify that the readings match the known moisture content. If the readings do not match, adjust the calibration again until you get an accurate reading.
4. Document the calibration: Once you have verified the calibration, document the adjustments you made and the reference sample used for future reference.

It's important to note that different types of maize can have different calibration requirements, so it's a good idea to recalibrate your moisture meter regularly and for different types of maize samples. You can also refer to the manufacturer's instructions for specific calibration procedures for your Super Pro moisture meter.

Send it in for professional repair and recalibration. There are no user serviceable parts. https://www.google.com/search?q=bosch+glm+250+vf+repair ..

Yes of course as long as the battery is removed.

Same Problem here freind.

switch -broken wire-corrosion - circuit fail--batteries dead new doesnt mean free from defects