Home Security - Page 9 - Recent Questions, Troubleshooting & Support
My lorex DVR won't turn on
If your Lorex DVR won't turn on, it is likely that the power cord is not properly connected. Make sure that the power cord is securely connected to the DVR and that the power switch is in the "on" position. If the problem persists, you may need to replace the power cord or contact the manufacturer for assistance.
My Swann 960 h pro series security camera system is flashing green light
A flashing green light on a Swann 960H Pro Series security camera system can indicate a few different things, depending on the specific model and configuration of your system. Some possible causes of a flashing green light include:
- The camera is in setup mode: When a camera is first powered on, it may flash a green light to indicate that it is in setup mode and ready to be configured.
- The camera is in standby mode: When the camera is not actively recording, it may flash a green light to indicate that it is in standby mode and ready to start recording.
- The camera is recording: Some models of the Swann 960H Pro Series security camera system have a green light that flashes when the camera is recording.
- The camera is low on power: Some models of the Swann 960H Pro Series security camera system have a green light that flashes when the camera is low on power.
- The camera is malfunctioning : Some models of the Swann 960H Pro Series security camera system have a green light that flashes when the camera is malfunctioning.
How do i reset my LG dvr password
To reset the password on your LG DVR, you will need to follow these steps:
- Press the "Menu" button on your remote control.
- Select "System" and then "Reset" from the menu options.
- Enter the default password, which is usually "0000" or "1234," and press "Enter."
- Follow the prompts to reset the password to a new value.
Note that these steps may vary depending on the specific model of your LG DVR. It's also important to check the user manual for the correct steps.
How to remove the top from a Brother Mademoiselle 821 sewing machine
To remove the top cover of your Brother Mademoiselle 821 sewing machine, you will need to follow these steps:
- Unplug the machine and make sure it is in the off position.
- Locate the knob on the top of the machine. This knob is typically located on the right side of the machine, near the back.
- Turn the knob counterclockwise to release the top cover. The cover should pop open.
- If the cover does not open, check to make sure that the machine is in the off position and that the knob is turned all the way counterclockwise.
- If you are still having trouble opening the top cover, you may want to consult the user manual for your machine. The manual should have specific instructions for removing the top cover, including any combination of dials that need to be switched to a certain spot.
- If you do not have a manual, you may be able to find one online by searching for the model number of your machine.
- If you are still unable to remove the top cover, you may need to contact Brother customer service or a technician for assistance.
1/14/2023 10:37:09 PM •
SPOT Home...
•
Answered
on Jan 14, 2023
Nutool SF20 electronic digital safe
Here are a few steps you can try to unlock your Nutool SF20 electronic digital safe:
- Double-check the battery installation: Make sure the batteries are correctly installed and not dead.
- Try the default code: Many safes come with a valuable default code in opening the safe when you forget your code or if the keypad stops working. The default code is usually found in the manual or inside the safe door.
- Check the locking mechanism: Make sure that the locking mechanism is not jammed or stuck. Try manually moving the locking mechanism with a screwdriver or other tool to see if it will release.
- Use the override key: If your safe has an override key, insert it into the keyhole and turn it to the left or right to open the door.
- Contact the manufacturer: If none of the above steps works, contact Nutool customer service. They may be able to provide you with additional troubleshooting steps or advice, or they may need to send a technician to repair or replace the safe.
1/14/2023 1:39:38 AM •
The Home...
•
Answered
on Jan 14, 2023
Not finding what you are looking for?