Hardware & Accessories - Page 4 - Popular Questions, Answers, Tips & Manuals
Do you know where I can find a timer for a Westpoint DQP 12 set 9011
I'm sorry, but as an AI language model, I don't have access to information on specific product manuals or instructions. However, I can provide you with some general troubleshooting steps for a timer that is not working properly.
- Check the power source: Make sure the timer is properly plugged in or has a fresh battery if it's a battery-operated device.
- Check the settings: Verify that you have correctly set the timer for the designated time and that it is in the correct mode of operation.
- Reset the timer: If the timer is not working as intended, try resetting it to its default settings.
- Clean the timer: Dust and debris can affect the timer's functioning, so make sure to clean it thoroughly.
- Seek professional help: If none of the above steps work, it may be time to seek professional help or replace the timer.
If you are still having trouble finding a timer specifically for your Westpoint DQP 12 set 9011, I would recommend reaching out to the manufacturer or a professional technician for further assistance.
3/2/2023 10:40:51 AM •
Hardware &...
•
35 views • 0 helpful votes
Would you please explain how to bypass the timer on a Smeg A2-2 Oven.
It is not recommended to bypass the timer on your Smeg A2-2 oven, as the timer is an important safety feature. However, if you still want to bypass the timer, here are the steps:
- Turn off the power to the oven at the main breaker.
- Locate the timer wires. In your case, there are 2 black pairs, 1 red pair, and a single white wire.
- Determine which wires are connected to the timer. These wires will be labeled "timer" or "clock."
- Cut the timer wires close to the timer unit.
- Strip the ends of the wires back about 1/2 inch.
- Twist together the wires that were previously connected to the timer.
- Cover the twisted wires with a wire nut.
- Wrap the wire nut and wires with electrical tape.
- Turn the power back on and test the oven.
Again, it is not recommended to bypass the timer on your oven, as this can be dangerous and may void your warranty. It is recommended to consult a professional technician or the manufacturer before attempting any repairs or modifications to your oven.
2/19/2023 5:56:46 PM •
Hardware &...
•
41 views • 0 helpful votes
I have an Arlec PC699GB timer. It is not following the weekly programme which I have set it to do.
It sounds like there may be an issue with the timer itself. Some things you can try include double-checking that the timer is set up correctly and ensuring that the power supply to the timer is stable. You can also try cleaning the contacts on the timer, as dirt or corrosion on the contacts can prevent the timer from functioning properly. If these steps do not help, it is possible that the timer is malfunctioning and may need to be replaced. If you have tried these steps and the timer is still not working as expected, you may want to consider contacting the manufacturer or a professional for further assistance.
12/13/2022 8:00:55 AM •
Hardware &...
•
197 views • 1 helpful votes
Hurcon vx salt chlorinator timer cannot be set to start beyond 19 hrs
The Hurcon VX salt chlorinator timer should allow you to set the timer beyond 19 hours (7pm). If you are unable to set the timer beyond this point, it may indicate a problem with the timer or the programming.
Here are some troubleshooting steps you can try to resolve the issue:
- Reset the timer: First, try resetting the timer by turning it off and unplugging it from the power source for a few minutes. Then, plug it back in and try to set the timer again.
- Check the programming instructions: Make sure you are following the correct programming instructions for the Hurcon VX salt chlorinator. Consult the user manual or manufacturer's website for detailed programming instructions.
- Check the timer mode: Check that the timer is set to the correct mode, such as 24-hour time mode or 12-hour time mode.
- Check the wiring: Check the wiring connections to ensure they are properly connected and not loose or damaged.
- Contact the manufacturer: If none of the above steps resolve the issue, contact the manufacturer or a qualified technician for further assistance. It is possible that there may be a problem with the timer itself that requires repair or replacement.
Can I reuse the rear spinal nut on my 2000 ford focus ?
It is generally not recommended to reuse a critical fastener like the rear spinal nut on your 2000 Ford Focus. These nuts are designed to provide a precise amount of clamping force and ensure proper alignment of the rear suspension, so reusing them may compromise the safety and performance of your vehicle.
Sunquest pro 24 turned on and shut off after a few mins
Based on the symptoms you have described, it's possible that there may be an issue with the ballast or the lamp in your Sunquest Pro 24 tanning bed.
Here are some steps you can take to troubleshoot the issue:
- Check the power source: Ensure that the tanning bed is plugged into a working electrical outlet and that the outlet is supplying the correct voltage. You can use a voltage tester to check the voltage.
- Check the ballast: The ballast is a device that regulates the electrical current to the lamp. If the ballast is faulty, it may prevent the lamp from lighting up. Check the ballast for any visible damage or loose connections. If you're comfortable with electronics, you can also use a multimeter to check the ballast's continuity.
- Check the lamp: If the ballast is functioning correctly, the issue may be with the lamp. Check the lamp for any visible damage or dark spots. You can also use a continuity tester to check the lamp's continuity.
- Check the timer: If the timer is not functioning correctly, it may prevent the tanning bed from turning on or lighting up. Check the timer for any damage or loose connections.
If you're unable to identify the issue, it's best to contact a qualified technician or the manufacturer's customer service for further assistance. Tanning beds use high-voltage electrical components that can be dangerous if mishandled, so it's important to take proper precautions and not attempt to repair the tanning bed yourself unless you're experienced with electronics.
11/26/2022 11:16:13 PM •
Hardware &...
•
220 views • 0 helpful votes
Where can I purchase timer wheel for GE 15164
You can purchase a timer wheel for a GE 15164 timer at a number of different places, including:
- Home improvement stores: Many home improvement stores, such as Home Depot and Lowe's, carry a wide range of timer parts and accessories, including timer wheels. You may be able to find a timer wheel for your GE 15164 timer at one of these stores.
- Online retailers: You can also purchase a timer wheel for your GE 15164 timer online through a retailer such as Amazon or eBay.
- GE Parts Store: You can also purchase a timer wheel directly from the GE Parts Store, which is the official parts and accessories store for GE appliances. To find a timer wheel for your GE 15164 timer, you will need to search for the specific part number for the timer wheel, which should be listed in your owner's manual or on the manufacturer's website.
- Appliance repair stores: Finally, you may be able to purchase a timer wheel for your GE 15164 timer at an appliance repair store. These stores often carry a wide range of appliance parts and accessories, including timer wheels.
It's always a good idea to check with multiple sources to find the best price and availability for the timer wheel you need.
How to program my timer to turn my lights on at 5pm and off at 10pm MODEL YLT-10
This timer is made by Living Solutions. It's best to set the timer prior to plugging it in.
To set current time:
Lift protective cover and set the current time by rotating dial CLOCKWISE until the arrow on the side of dial aligns with the correct time.
Note: Timer dial will rotate COUNTER-CLOCKWISE when operating.
To set timer:
Move timer arms (located around the dial) towards the middle of the dial for the time you would like the timer OFF.
Move the arms towards the outside of the dial for the time you would like the timer ON.
Release protective cover.
12/10/2022 9:01:18 PM •
Hardware &...
•
102 views • 0 helpful votes
Not finding what you are looking for?