Hardware & Accessories - Page 7 - Recent Questions, Troubleshooting & Support

If the timer does not rotate, then the clock motor gears have been stripped, or the motor has gotten weak.
With most expensive timers, you can buy and replace the clock motor.
But not with the Malibu power pack.

I tried spraying WD-40 on my timer dial.
And broke the power pack apart looking for ways to disassemble it.
Power packs are one-piece units.
New power packs have electronic clock, so test your circuit with circuit analyzer before assuming new electronic gizmo will work better.

"Harry" wrote in two months ago with a brilliant work-around.
His timer stopped working.
He bought a cheap plug-in timer and then connected power pack to that timer.

Harry also said that his power pack has 5 year warranty.
He was 'negotiating' with malibulights.com over the warranty.
I hope he writes back and says how it went.
Here's the contact page.
http://malibulights.com/customer_service/contact_us.aspx

Here are some tips for next power pack that might save money:
The reason I add these tips now, before your power pack needs replacement is some fella wrote-in.
He bought 500 Watt power pack to replace 300 Watt > thinking bigger was better.
Power pack burned out. Here's why:
1) Match wattage of bulbs with wattage of power pack
-15 each X 20 watt bulbs = 300 watts, so install 300Watt power pack
2) Installing a 500W power pack on 300W of bulbs will burn out bulbs and power pack.
3) Replace bulbs as soon as they burn out or other bulbs will burn out and power pack will burn out.
4) When working on bulbs, unplug power pack or it may burn out.
http://www.malibulights.com/guides_support/low_voltage_planning_guide/select_your_power_pack

Another option is to take advantage of fixya phone support.
Fixya expert will walk you through the same information for a price.

No one appears to have tried this before as it is more often used as a Pool Timer, But what you need is the Switch and the Timer wires in parallel. So live to the timer and also to the switch, and negative to the timer and the switch. In that way either the light switch or the timer can switch the lights on and off. https://www.google.com/search?q=wire+a+T104+intermatic+timer+on+a+277v+light+circuit+with+a+switch+already+installed ..

copy and paste https://www.intermatic.com/userfiles/documents/tb121%20-%20instructions%20-%20en_fr.pdf ..

the unit requires a 30 amp beaker and 10 AWG wire. If wired correctly i would suspect shorted heating element.

It is not clear which product you have. Attach photo of timer for clear identification by expert. Otherwise following link has resources to help identify common timers http://waterheatertimer.org/How-to-set-timers.html http://waterheatertimer.org/Intermatic-timers-and-manuals.html http://waterheatertimer.org/Woods-timers-and-manuals.html Gene Water Heater Timers Save Money If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Question edited for clarity, guess at what you have, not a Chevy Malibu? Question moved from Microwaves to Timers. Reset buttons on timers remove all set On/Off programs in a long press of the buttons. https://www.google.com/search?q=Malibu+voltage+transformer%2C+press+to+reset

It sounds like there may be an issue with the display or the power supply of your Intermatic EH10 timer. First, check to see if the power supply is providing the correct voltage and amperage to the timer. If the power supply is working correctly, then it is likely that the issue is with the timer and you may need to have it serviced or replaced.

Suena como si pudiera haber un problema con el transmisor de su radio Cobra 200 GTL N9. Es posible que la fuente de alimentaci?n de la radio no est? proporcionando suficiente energ?a al transmisor, o que el transmisor no est? conectado correctamente. Debe verificar la fuente de alimentaci?n para asegurarse de que est? conectada y proporcione el voltaje y la amperaje correctos a la radio. Tambi?n debe verificar todas las conexiones entre el transmisor y la radio, incluidos el cable de antena y el cable del micr?fono. Si las conexiones est?n seguras y la fuente de alimentaci?n funciona correctamente, entonces el problema puede estar con la radio misma y es posible que necesite ser atendida por un profesional.

It sounds like the timer may have been affected by the power outage and is not functioning properly. If the timer is a mechanical timer, you can try resetting the time on the timer and check if the trippers (ON/OFF pointers) are set to the correct time and are not loose. If the trippers are loose, then they could slip and cause issues with the pump turning on/off at the correct times. You can also try lubricating the manual on/off switch with a lubricant such as WD-40. If the timer is a digital timer, you can try replacing the battery to see if that resolves the issue.

The color codes for the timer switch for model DSKP333EC5WW are as follows: Red - Power, White - Start, Black - Common, and Blue - Ground. The red wire needs to be connected to the power terminal, the white wire needs to be connected to the start terminal, the black wire needs to be connected to the common terminal, and the blue wire needs to be connected to the ground terminal on the new timer switch GE part # WE04X23897.

It is possible that your Woods timer is malfunctioning due to a power surge or power outage. You can check the time settings by pressing the "SET" button on the timer and then using the "+" and "-" buttons to set the time. If the timer is still not setting correctly, then it is likely the timer is damaged and needs to be replaced.

It sounds like there may be an issue with the timer itself. Some things you can try include double-checking that the timer is set up correctly and ensuring that the power supply to the timer is stable. You can also try cleaning the contacts on the timer, as dirt or corrosion on the contacts can prevent the timer from functioning properly. If these steps do not help, it is possible that the timer is malfunctioning and may need to be replaced. If you have tried these steps and the timer is still not working as expected, you may want to consider contacting the manufacturer or a professional for further assistance.

It appears to be mentioned in the manual, but it is too tiny to read. https://www.google.com/search?q=Tork+ss700z%2C+holdpf ..

try here...... https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Freezer/569-5-1064719-/New/Whirlpool-Freezer-Not-Defrosting-Ice-Buildup-F20BBA Best to you

Just reprogramme it

You can purchase a timer wheel for a GE 15164 timer at a number of different places, including:

1. Home improvement stores: Many home improvement stores, such as Home Depot and Lowe's, carry a wide range of timer parts and accessories, including timer wheels. You may be able to find a timer wheel for your GE 15164 timer at one of these stores.
2. Online retailers: You can also purchase a timer wheel for your GE 15164 timer online through a retailer such as Amazon or eBay.
3. GE Parts Store: You can also purchase a timer wheel directly from the GE Parts Store, which is the official parts and accessories store for GE appliances. To find a timer wheel for your GE 15164 timer, you will need to search for the specific part number for the timer wheel, which should be listed in your owner's manual or on the manufacturer's website.
4. Appliance repair stores: Finally, you may be able to purchase a timer wheel for your GE 15164 timer at an appliance repair store. These stores often carry a wide range of appliance parts and accessories, including timer wheels.

It's always a good idea to check with multiple sources to find the best price and availability for the timer wheel you need.

Question edited for clarity and spelling bottoms to buttons, and dose to does. Question moved from Television category. Cut the mains power to it for an hour. Of contact one of the distributors. https://www.google.com/search?q=Paragon+timer+model+EL71%2F120 ..

Hi, It seems like your device is being sold on websites like amazon and ebay. Your best move might be to request the instructions from one of those sellers and ask them to send it to you as an individual product. Otherwise, you might have to reach out the librarian at a local college or technical college to ask if they could provide you the instructions that you're seeking. Thank you.

Open following link to identify timer with manual:
http://waterheatertimer.org/Woods-timers-and-manuals.html#N1506

Manual for Intermatic/Noma 1506
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

OK, even though the thread is old, I had to add my answer, to clarify things. Settings: F = Switch is Off O = Switch is constantly On (no timer mode) d = Switch turns On at Dusk, and turns Off at Dawn 1-9 = Switch turns On at Dusk, and turns Off after the number of hours shown in the display 1.-9. = Switch turns On immediately, and turns Off after the number of hours shown in the display