Exercise & Fitness - Answered Questions & Fixed Issues

All question need full 'make model (what it is)', Margaret, first 3 words or this happens.

Fluke BT5300 Series Battery Tester

Fluke https://www.fluke.com > product > battery-analyzers Specifications: Fluke BT5300 Series Battery Tester ; BT5310/BT5311, BT5320/BT5321 ; Digit, 6.5 digits, 7.5 digits ; Range, 10 V ; Max. Display value, ±11.00000V · ± ...

(BT) Air Baltic 5310 Flight Tracker

FlightStats https://www.flightstats.com > flight-tracker BT5310 Flight Tracker - Track the real-time flight status of Air Baltic BT 5310 live using the FlightStats Global Flight Tracker.

Airbaltic BT5310 Flight Status

Trip.com Official Site‎‎ ' Travel Deals and Promotions https://us.trip.com > ... > Flights from Munich to Lisbon Track real-time flight status of BT5310 from Munich to Lisbon on Trip.com. Get live updates on flight arrival & departure times and other travel information ...

QC620 Skid Digger Thumb

GLC Equipment https://www.glcequipment.ca > product > qc620-skid-dig... SKU: BT5310 - 48 Category: Back Trenchers. MPN: BT5310. Manufacturer: Wallenstein. Brand: Wallenstein. Description; Additional information; Reviews (0) ... $910.00 · ‎ In stock

BT 5310 - Aluminum Komatsu WA450-6 Wheel Loader ...

C, G, & J Inc https://cgj.com > product > bt-5310-aluminum-komatsu... BT 5310 - Aluminum Komatsu WA450-6 Wheel Loader Radiator. $1,404.75. The BT 5310 all aluminum radiator is an exact fit, OEM replacement for Komatsu WA450-6 ... US$1,404.75 ..

CHECK WITH THE PLACE YOU GOT IT

They are all similar to this https://www.treadmilldoctor.com/wiring-diagram-smooth0001 Very few actually have service manuals with diagrams https://www.google.com/search?q=prorunner+46xt+treadmill+service+manual ..

SKiers.pdf (usermanual.wiki) The sensor on a ski machine is usually a magnet mounted in a flywheel and a reed switch very near to where the magnet passes as the flywheel turns Easy Monitor for NordicTrack Skier : 4 Steps (with Pictures) - Instructables

Check RPM Feedback: The most common cause for the timer to stop after 7 seconds on a Precor elliptical is NO RPM feedback. Start by checking the connection of the speed sensor to the lower board. If necessary, reset the connection. Also, inspect the magnet located on the user's right crank arm (versions 1 and 2) or the user's left crank arm (version 3). The magnet passes the speed sensor with each revolution of the crank arm. Ensure that the magnet is installed correctly, with its south pole facing the speed sensor. You can verify the magnet polarity using another magnet or a compass. Speed Sensor Spacing: Confirm that the spacing between the speed sensor and the magnet is within the range of 1/8" to 1/4". Adjust if necessary. Battery and Power: If your elliptical has a battery, check its status. A low battery could cause issues. Consider using the optional power adapter kit to ensure consistent power supply. Error Codes and Clearing Logs: Check for any error codes displayed on the console. Clear the error codes and power down the unit. Inspect cable connections to ensure they are fully seated. Power on the unit and monitor the error code log for any reoccurrence. Professional Assistance: If the issue persists, consider reaching out to professional repair services or contacting Precor support for further assistance.

This is probably the easiest way to explain; https://www.youtube.com/watch?v=MB-pUd78DpA

It sounds like you're having trouble removing the screws from your Fitbit Charge HR using a replacement band screwdriver kit. Here are a few things you can try:

1. Apply Pressure: Sometimes, screws can be quite tight. Make sure you're applying enough pressure while turning the screwdriver to loosen the screws.
2. Use Lubricant: If the screws are stuck due to rust or debris, a small amount of lubricant (such as WD-40) applied to the screws might help loosen them.
3. Different Angle: Try turning the screwdriver at a slightly different angle. Sometimes this can make it easier to grip and turn the screw.
4. Use a Different Screwdriver: If the screwdriver provided in the kit isn't working well, you might try using a different one. Sometimes, the quality of the screwdriver can make a big difference.
5. Seek Professional Help: If you're still having trouble, it might be best to seek assistance from a professional, such as a watchmaker or jeweler, who has experience working with small screws and delicate electronics.

If none of these solutions work, it's possible that the screws are damaged or defective. In that case, you might need to contact the manufacturer for further assistance or consider replacing the device altogether.

Yes, absolutely! You can swim with your Inspire HR. In fact, it is designed to detect your swim activity if you like to swim laps and turn that activity on (you can do it in the app under "exercise goals").

Check the Generator Tension Bolt : Loosen the cap screws and tighten the generator tension bolt with an Allen wrench. Adjust it until the drive belt inside the pedals is no longer loose. If it's too tight, loosen the generator tension bolt as needed. Retighten the cap screws and replace the side shields. Unplug your elliptical from the power outlet and examine the wire harness connections between the console and the resistance motor. Check continuity using the multimeter and replace any non-working wires. Inspect the Resistance Motor Voltage: There is a small motor under the shroud that operates the resistance motor. It's about the size of a roll of half dollars. Use a multimeter to check if the console is sending power to the resistance motor when you manually adjust the resistance. If there's no voltage, your elliptical console may need replacement. If this doesn't resolve the issue, you might contact Nordic support.

If you've changed the batteries in your Kettler Coach LS rowing machine's display unit and it still doesn't work, there could be a few potential issues causing the problem. Here are some steps to troubleshoot:

1. Check Battery Orientation: Ensure that the batteries are inserted correctly with the correct polarity (+ and -). Sometimes, even if the batteries are new, they may not make proper contact if they're not inserted properly.
2. Inspect Battery Compartment: Look inside the battery compartment for any signs of corrosion or damage. Corrosion can prevent proper electrical contact and cause the display unit to malfunction. If you see corrosion, clean the contacts with a cotton swab and some rubbing alcohol.
3. Test Batteries: Even if the batteries are new, they could be defective. Try testing the batteries with a battery tester or multimeter to ensure they have sufficient charge.
4. Reset Display Unit: Some electronic devices have a reset function that can help resolve issues. Try resetting the display unit according to the instructions in the user manual. This often involves holding down a specific button for a few seconds.
5. Check Power Connection: If the display unit is powered by an external power adapter, ensure that it's plugged in securely to both the display unit and the power outlet. Test the power outlet with another device to ensure it's functioning properly.
6. Inspect Display Unit: Carefully inspect the display unit for any physical damage, such as cracks or broken connections. Damage to the display unit itself could be preventing it from functioning properly.
7. Contact Customer Support: If you've tried the above steps and the display unit still doesn't work, it's possible that there is a more serious issue with the unit. Contact Kettler's customer support for assistance. They may be able to provide further troubleshooting steps or arrange for repairs if necessary.

By following these steps, you should be able to identify and potentially resolve the issue with the display unit on your Kettler Coach LS rowing machine.

If the resistance braking system on your Olympus Sport exercise bike model OS-11202 is not working, there could be a few potential issues causing the problem. Here are some steps you can take to troubleshoot and possibly fix the issue:

1. Check Power Source: Ensure that the exercise bike is properly plugged into a power source if it requires electricity. Some models may have electronic resistance systems that need power to function.
2. Inspect Resistance Mechanism: Examine the resistance mechanism to see if there are any visible signs of damage or wear. Look for loose cables, broken parts, or anything that appears out of place.
3. Test Resistance Levels: Try adjusting the resistance levels on the bike to see if there is any response. If the resistance levels do not change when you adjust them, it could indicate a problem with the resistance mechanism or the control panel.
4. Reset the Bike: Turn off the exercise bike, unplug it from the power source (if applicable), and wait for a few minutes. Then, plug it back in and turn it on again. Sometimes, resetting the bike can resolve minor issues.
5. Check User Manual: Refer to the user manual for troubleshooting tips specific to your model of exercise bike. The manual may have information on common problems and how to fix them.
6. Contact Manufacturer or Support: If you're unable to resolve the issue on your own, consider contacting the manufacturer or customer support for assistance. They may be able to provide further troubleshooting steps or advise you on repair options.
7. Professional Repair: If the resistance braking system is still not working after attempting these steps, it may be necessary to take the exercise bike to a professional repair technician. They can diagnose the problem more accurately and perform any necessary repairs or replacements.

By following these steps, you should be able to identify the cause of the resistance braking issue on your Olympus Sport exercise bike and take appropriate action to resolve it.

The reviews are reasonable https://www.google.com/search?q=Harison+Fitness+Recumbent+Exercise+Bike+review ..

Question edited for clarity.Duplicate question deleted. Refresh page to see your question posted.Error Message: E1 (ERROR 1): Normal state: During workout, if the monitor does not get signal from the adjustment motor more than 4 seconds and check under successive 3 times then the LCD will show E1. Power on state: The adjustment motor will return to zero automatically, when the signal of motor cannot be detected for more than 4 seconds then the adjustment motor's driver will be cut off immediately and show the E1 on the LCD display. All the other digital and function mark are blank, and the output signals are cut off also.Page 28https://www.fitnessrepairparts.com/equipment_files/163532-R250-Recumbent.pdfClean connectors, check wiring, replace sensor would be the fixes.https://www.google.com/search?q=BladeZ+R250+Recumbent+Exercise+bike+E1+error+fix..

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/

That sounds like worn bearings or something rubbing. Magnets don't make a noise.

Using https://www.google.com, I saw a possible repair method shown for similar treadmills: http://www.wolfswords.com/misc/treadmill%20fix/index.html Low Speed Error on Treadmill

Even with a new control board, if the motor itself is faulty (e.g., damaged windings, worn brushes, or a burned-out coil), it won't respond to speed requests. Aside from the motor control board, other components (such as relays, capacitors, or fuses) can impact motor operation. Inspect these components for signs of damage or malfunction. Check if there's an emergency stop button, safety key, or other safety mechanisms that might be engaged. Alas, you are at the point it would take a professional technician to diagnose the problem, particularly if you see no visible damage to the components mentioned above as well as no engaged safety mechanisms. I am uncertain if customer support for the device would be forthcoming for this used device. Without that guidance or some lucky observation on your part, it is questionable how much you will be rewarded for chasing this rabbit down the rabbit hole.

Question edited for clarity. It is a Treadmill, not a THREADmill. Question moved from Video Consoles. Not a good idea posting your email address as a user name!! This site get 11 million viewers a year including thousands looking for addresses to harvest and spam. Fortunately most spare parts are still available. I was looking to see how the console gets its power, but it is not shown. Some use a small wall plug in transformer, so use a board transformer of the mains supply to the whole treadmill. You would need to trace with a multimeter. You could also clean behind the button with switch cleaner. https://www.fitnessrepairparts.com/equipment/Select/26678/Horizon/Horizon-CT7.2-2013-TM685B https://www.fitnessrepairparts.com/equipment/26678/diagrams/44632 https://www.google.com/search?q=Horizon+CT+7.2+treadmill+parts ..

Question edited to add 'make model (what it is)'. https://www.google.com/search?q=treadmill+oma-116b+manual ..

Belt Not Moving: If the belt isn't moving, there are a few potential causes. One common issue is a faulty motor controller. Even if the red LED on the control panel is lit up, it might not be sending voltage to the motor. To check the motor, follow these steps: First, test the motor using the methods outlined in this guide: Motor Testing. Motor Testing (treadmilldoctor.com) If the motor is working, the motor control board may be the culprit. Console Wire Check: Inspect the console wires that run from the motor board through the primary wire. Loose or damaged wires can cause the belt to stop moving. Reconnect any loose wires. Smoking Smell: The smoking smell you noticed could indicate an electrical issue. It's essential to address this promptly. Off-Center Belt Alignment: If the belt is off-center, it can cause problems. Confirm that the treadmill is on level ground by using a bubble level. Then, follow these steps for belt alignment: Belt Moves to One Side. How to Fix Treadmill Belt Slipping to One Side ' Stay Centered (treadmilldoctor.com) Loud Mechanical Sound: The noise during operation might be due to misalignment or worn components. Inspect the treadmill's moving parts for any signs of wear. Retirement Decision: Based on the severity of the issues and potential repair costs, you'll need to decide whether it's worth fixing or if it's time to retire the treadmill. Professional Inspection: If you're unsure, consider having a professional technician assess the treadmill.