Electrical Supplies - Page 4 - Recent Questions, Troubleshooting & Support
How to open the Hubbell YQ230 in order to test line voltage.
Turn off the power source to the device you want to test.
Unplug the adapter from the power source.
Locate the two screws on the adapter's faceplate.
Use a screwdriver to remove the screws.
Gently pull apart the two halves of the adapter.
Once you have opened the adapter, you can use a voltage indicator to test the line voltage . If you don't have one, you can purchase it from Hubbell's website or any other electrical equipment supplier. The MarineEngine.com website states that the Hubbell YQ230 adapter has a UV-resistant housing and two screws on its faceplate. You can use a screwdriver to remove these screws and open the adapter.
Is there a operation manual for Miller and falls ATS
This manual is all I could find.
Instructions and Parts List for Setting Up and Operating Millers Falls Langdon Acme Mitre Box, Langdon Mitre Box : Form No. M709 : Millers Falls Co. : Free Download, Borrow, and Streaming : Internet Archive
I also found a few results on the web for "miller and falls generator automatic transfer switch". One of the results is a 240V Automatic Transfer Switch by Millers Falls that can be used with GSD7500 & GSD9000 Series Diesel Generators . This switch can be wired directly to the house or workshop mains power fuse box. In Automatic mode, the switch will automatically start the generator if mains power fails for whatever reason. Once the generator is up to full speed and generating voltage at 50Hz, the switch will feed the power into the required load point. When mains power is restored, the ATS will transfer load from the generator back to mains power then shut down the generator. This same function can also be performed in manual mode if required. The wiring of the ATS must only be performed by a licensed electrician. The solenoid operating mechanism of the ATS ensures a high-speed transfer of loads between alternate sources of power, regardless of current draw. These ATS transfer boxes are available in 3 models to suit Millers Falls GSD7500 & GSD9000 (silenced & open frame) diesel generators, GSD13000 diesel generators (silenced & open frame), GSC12000i-Y & GST11000A petrol generators
10/26/2023 1:42:37 PM •
Miller...
•
Answered
on Oct 26, 2023
No power at outlets
I have a DeWalt dg 6000 and it does not have electricity coming out of the generator to the plug out lit so what do you think about the power not working
Can this controller be replaced with a controller thats not nema 4
Whether or not a NEMA 4 controller can be replaced with a controller that is not NEMA 4 depends on the specific application. NEMA 4 controllers are designed to withstand water and dust ingress, so they are often used in outdoor or harsh environments. If the controller is being used in an environment where it is exposed to water or dust, then it is important to replace it with a NEMA 4 controller.
Overall, it is important to consult with a qualified electrician before replacing a NEMA 4 controller with a controller that is not NEMA 4. The electrician can assess the specific application and recommend the best controller for the job.
If you want to look for a controller, you can visit: https://www.chipsmall.com/bigcategory/industrial-automation-and-controls.html to search for the controller you want.
What is the colored wire positions on a craftsman 2400 mower key switch
See following URL for complete wiring diagram.https://www.searspartsdirect.com/model/3x23oa7iyt-000247/craftsman-917203831-front-engine-lawn-tractor-partsSwitch Terminal to circuit color.B RedS WhiteM Black (Black/white)A1 BlueA2 BlackL BlackG BlackUnfortunately 4 of the circuits are not uniquely color coded. If the black wires have been disconnected from the switch socket then it will be necessary to identify each black wire to its respective circuit.
10/13/2023 5:49:31 AM •
Craftsman...
•
Answered
on Oct 13, 2023
I have a generac ix
You engine has a low oil level sensor. If the oil level is low or..... the sensor is bad it will ground the ignition from the coil with the engine switch on. For troubleshooing only disconnect ONE wire from the sensor AFTER you make sure the engine oil level is properly serviced. Then check for spark.
If this does not correct the problem just respond and I will help you.
Thanks for choosing FixYa,
Kelly
Not finding what you are looking for?