Brother Sewing Machines - Page 3 - Recent Questions, Troubleshooting & Support

sounds like a bad place on the screw thread. see if the tightening screw will go all the way on without a foot in place if not then try adding a small thin washer (one that fits the screw) and see if that fixes it.

The best parts suppliers are in this link. https://www.google.com/search?q=Brother+bm2800+parts .,.

make sure your foot peddle is fully pluged in. It's a foot pedal error code. Try unpluging your foot pedal and start the machine if it works without the foot pedal have the foot pedal repaired or replaced.

Have you installed a brand-new needle? Usually, a bent or damaged needle will make strange noises. You can probably open the bobbin area and hand-rotate the handwheel and watch the needle action. Could be the needle/hook timing is off and the needle is nicking as it lowers to pick up the bobbin thread. ...

Brother has extensive website and customer service. If you go to their site for your country and put in your model number, they'll tell you if they can get you a manual. Most are just downloads.. very easy. I'd give you a URL but I don't know where you are located. They have fabulous customer service, so try there first.

Question edited for clarity, again. 'Make model (what it is)'. Question moved to Brother Sewing Machine again :>) Hello again Ceri The first company in the link are the one for all your sewing spares of accessories. Simply the best there is. https://www.google.com/search?q=Brother+546D+needles ..

Question edited for clarity, plus add maker. Question moved from Computers to Brother Sewing Machine. The manual is here

HANDBOOK FOR OVERLOCK SEWING MACHINE

http://www.sewinginthebarn.com > manuals > Bro... PDF (2) Loosen the needle set screw with the screwdriver (M530/. M530D) or hexagonal wrench. M546. 1M 546D) and remove the needle. NOTE: When removing the needle,. 31 pages ..

You have to either tie it to a side hole in the bobbin, or do about 6 turns by hand first otherwise it just slips.

Question edited for full maker, model (what it is)'. Question moved from Computers and Internet to model category. This doesn't appear to be documented. Normally I can find anything like this because it has happened to others. https://www.google.com/search?q=pe-770+doesn%27t+tie+knot ..

It weighs 92 pounds.

LX2375 ' HomeSewingEmbroidery ' By Brother

https://www.brother-usa.com > products > lx2375 It features 20 stitch functions using the two built-in stitches (straight and zigzag), intuitive dials for changing the stitch width and length, an easy bobbin ... Missing: weight ‎kg

• Machine weight - Brother

  https://help.brother-usa.com > answers > detail > a_id This machine weighs 92 lbs. Click here to display all models covered by this answer.

Thanks for your question. https://www.brother-usa.com/virdata/content/en-us/had/consumer/usersmanual/um_885-e42_e43_om01en[1].pdf

This error code is often triggered when you try to sew with the Presser Foot it the UP position. Lower the foot, turn the machine off and on again. If this doesn't fix the issue the problem is probably the trigger lever inside the machine. The lever controls the cut-out switch for the presser foot. It is a common fault on Brother machines. The lever 'sticks' and doesn't turn off the safety switch. You can repair this yourself BUT you have to open up the body of the sewing machine to get to it. I've attached a video that explains it in more detail. *Note* If you do try to do this yourself make sure the machine is NOT plugged in. Also make sure you have remove All the screws before you separate the two halves of the plastic body shell. If you miss one you'll snap bits of plastic off possibly making the machine unsafe to use.

https://support.brother.com/g/b/manualtop.aspx?c=us&lang=en&prod=hf_ce1008eus Try this site

With increasing speeds volume swelling rpm not increasing

You need to find out what that particular error code means and address that particular issue. It could be something very simple but frustrating, just the same.. Search for: Make Model error code F04

Is it this one? http://download.brother.com/welcome/doch000169/nx600ug01en.pdf Teddy 600 doesn't appear to give many hits, but there is a video. https://www.google.com/search?q=Brother+Teddy+600 ..

I had the same problem. It started after I took the cover off to fix something else. After I screwed the cover back on, I kept getting the E1 message even when the foot was already down. I took the cover off again, and I found that there is a metal tab at the top left of the front cover, that is pushed by a metal tab in the back that moves when you put the presser foot up or down. You can see this metal tab moving in the back if you put the foot up and down with the cover off. Just putting the foot down(I think) before putting the cover back on fixed it so one metal tab is on the correct side of the other metal tab.

Troubleshooting Brother Sewing Machine (Fix & Repair Guide) (sewingiscool.com)

Manuals ' 3034D ' United Kingdom ' Brother

TRY HERE Manuals & Guides ' Brother UK