Brother Office Equipment & Supplies - Page 5 - Recent Questions, Troubleshooting & Support

if you buy a printer parts just go in : 686 336results in Printers Scanners Supplies

All four LED's flashing together indicate an error that cannot be cleared by an end user. Normally a service call will be required.I would recommend getting in touch with Brother or a printer technician.

this printer has 6 Drum, check all, and look internal counters is available on the menu they are down counters. If Continues go the Brother Repair Center, for repair.

check the continuty in scanner cable to cis unit and check the continuity 2ends off scanner cable. 1.cable problem 2cis problem

According to the brother support web site the printer should detect the new waste toner box. However if it does not detect it you may need to clean the contacts see https://support.brother.ca/app/answers/detail/a_id/134713/~/how-do-i-clear-the-message-replace-wt-box%3F for more details explanation of issue

This worked for me:The machine turns on Mirror mode by itself, how can I correct this?1. Turn Off the machine.2. Open the tape compartment cover and remove the tape cassette from the machine.3. Re-install the tape cassette back into the tape compartment. Push down on top of the cassette; ensure that it is seated firmly in the tape compartment and close the cover completely.4. Reset the machine.Note: All text, settings and stored files will be cleared.a. Hold down the Shift and R keys.b. While holding down the Shift and R keys, press the On/Off key once.c. Release the Shift and R keys.5. Try printing a label.6. If the problem appears, try another Brother TZe tape cassette.If the problem persists, your machine may require service.The machine has a one year limited exchange warranty. If the machine is in warranty, call Brother Customer Service at 1-877-Brother (1-877-276-8437) for warranty options.If the machine is out of warranty, contact a Brother Authorized Service Center for repair by clicking on the link below:http://www.brother-usa.com/service/default.aspx

This usually works.

MFC- 9440, 9840cdw Print Unable 32

Usually caused by a sticking density sensor solenoid and can easily be repaired.

• Remove the rear cover

• Remove the fuser

• Remove the Hi Voltage PCB

• Check the angled density sensor window for sticking. When you move it, it should spring right back. If it hesitates at all, repair the solenoid.

• Remove the old foam and replace it with adhesive labels.

• Reassemble machine and test.

I will confuse you. Take a look at the installation manual. https://www.brother.co.uk/support/mfcj4510dw/manuals

I was looking for one hour some drivers, coudn`t find even on original website this model, try to install some different model, sometimes it works, sorry I can`t help you. Or you can download some portable program to find the driver, just download and unpack, turn on the printer and open this program http://www.tactools.ru/iobit-driver-booster-pro-1-1-0-551-final-datecode-26-11-2013-portable/?utm_source=rss&utm_medium=rss&utm_campaign=iobit-driver-booster-pro-1-1-0-551-final-datecode-26-11-2013-portable http://www.brother-usa.com/Support/Default.aspx?PGID=2#.UrCdobTCemp

Check flatcable connection to main circuit board:

Open cover and release the "Z" cover (right side) which hides the flatcable. Simply stick the cable to mainboard.

Assuming that you're using Windows 10, most printers seem to have problems with printing through wifi, especially if you've just made some major updates to Windows 10. Try these steps first - #1 You might have to reinstall the software and/or the driver for your computer. If it still doesn't work, try printing with windows default driver. If nothing works, then the best thing is to print using a USB cable.

When the Brother Printer not connecting to WiFi device or network, many reasons behind that below mention Incorrect using the Wireless network Using the Weak Wi-Fi signal Brother printer away from Wi-Fi router Incorrect using the Wi-Fi network setting Firmware and Printer driver out of updated or not updated with the latest version Printer driver corrupted condition SSID or network incorrect using If you will solve the above reason then your brother printer is easy to connect with a Wi-Fi network. Now Get resolved the Brother Printer Won't connect to the Wi-Fi network? Get below the troubleshooting steps to solve the Brother printer not connecting to the Wi-Fi issues. Step1: Using the correct the Wireless network Step2: Wi-Fi network must be strong Step3: Printer placed near the Wi-Fi router or network Step4: Printer WPS setting must be correct Step5: Update the Firmware and driver problem Step6: Use the latest version printer driver Step7: Correct using the SSID network setting Next also Read: How to fix the Brother Printer In Error State?

You can find all the procedures required to change the paper rollers, with detailed images for each step in the service manual for this equipment.https://www.anyservicemanuals.com/downloads/brother-dcp-j525w-dcp-j725dw-dcp-j925dw-mfc-j280w-mfc-j425w-mfc-j430w-mfc-j435w-mfc-j625dw-mfc-j825dw-mfc-j835dw-service-manual-and-parts-list-manual/

https://www.worldclassink.com/Brother-MFC-240C-Printhead-printer14311-ift18.html Free shipping on allBrotherMFC-240C Printhead. Genuine. Free $25 gift certificate for all orders over $100. Next day and second day shipping available. Free Shipping OnBrother

Clean the scanner element. Possible debris on the led bar.

http://homeappliance.manualsonline.com/support/brother/sewing-machine/stiches-4032518

It is a garbage job. You can't keep a printer in the heat, cold and condensation of the loft. No board schematics exist, but here is the service manual.. https://www.manualslib.com/manual/697873/Brother-Hl-2030.html and there are no pictures. :>D

"Unable to Print 5A" - Brother

https://help.brother-usa.com > answers > detail > a_id The message "Unable to Print 5A" will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of ...

• "Unable to Clean 5A" - Brother

  https://help.brother-usa.com > answers > detail > a_id The message "Unable to Clean 5A" will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of paper ... ..

Brother printer Error Unable to print 5A paper jam repair no ...

https://www.youtube.com > watch PREVIEW 2:56 brother #Brotherprintererror #Brother5Aerrorthank you so much for watching please like,share and subcribe my channelYOU GET ERROR LIKE THESE ... YouTube · Shivam Sharma Repairs · Jul 15, 2020

How To Fix Brother Printer Error 5a

https://printererrorcode.com > Brother Printer

Synchronization signal from the main motor cannot be detected. Or the main motor speed is unstable after a set period of time.You can consult the service manual in order to solve this error.https://www.anyservicemanuals.com/downloads/brother-dcp-l8400cdn-dcp-l8450cdw-mfc-l8600cdw-mfc-l8650cdw-mfc-l8850cdw-mfc-l9550cdw-service-manual-and-parts-list-manual/

Use the service manual to repair your Brother MFC-J460dw.https://www.anyservicemanuals.com/downloads/brother-dcp-j562dw-j785dw-mfc-j460dw-j480dw-j485dw-j680dw-j775dw-j880dw-j885dw-j985dw-service-manual-and-parts-list-manual/