Brother MFC - Popular Questions, Answers, Tips & Manuals
Brother MFC 9840 CDW. How can I connect to wi-Fi?
Full instructions from the Brother website
Set up your Brother machine on a wireless network.
2. Set up a Brother machine on a wireless network
To set up your Brother machine on a wireless network:
- Connect the power cord to your Brother machine and then connect it to an AC power outlet (electrical socket).
Turn your Brother machine on.
- > Click here to see how to reset the network settings.
- Press the Up or Down arrow key to select the following:
- Select Network or LAN. Press OK.
- Select WLAN. Press OK.
- Select Setup Wizard. Press OK.
- When WLAN Enable? or Network I/F switched to Wireless appears, enable the wireless network.
This will start the wireless setup wizard.
- The machine will search for your network and display a list of available Network Names (SSIDs).
When a list of SSIDs appears, press the Up or Down arrow keys to select the SSID you wrote down earlier.
- Press OK.
- Press the Up or Down arrow key to select one of the options below: If your network is configured for Authentication and Encryption you must match the settings used for your network.
Available authentication and encryption methods depend on your model.
- No Authentication or Encryption:
Select Open System, press OK then select None for Encryption Type? and press OK.
To apply the settings, select Yes.
- No Authentication with WEP Encryption:
Select Open System, press OK then use the Up or Down arrow key to select WEP for the Encryption Type? and press OK.
Select the appropriate key number and press OK.
Enter the WEP key (Network Key), then press OK to apply your settings.
To apply the settings, select Yes.
- Authentication with WEP Encryption:
Select Shared Key and press OK.
Select the appropriate key number and press OK.
Enter the WEP key (Network Key), then press OK to apply your settings.
To apply the settings, select Yes.
- Authentication with WPA/WPA2-PSK (TKIP or AES) Encryption:
Select WPA/WPA2-PSK, press OK then use the Up or Down arrow key to select TKIP or AES for the Encryption Type? and press OK.
Enter the WPA/WPA2-PSK password (Network Key), then press OK to apply your settings.
To apply the settings, select Yes.
- Authentication with LEAP:
Select LEAP, press OK.
Enter the user name and press OK.
Enter the password (Network Key), then press OK to apply your settings.
To apply the settings, select Yes.
- Authentication with EAP-FAX/NONE, EAP-FAQT/MS-CHAPv2, EAP-FAXT/GTC (TKIP or AES Encryption):
Select EAP-FAST/NONE, EAP-FAST/MSCHAP(EAP-FAST/MS-SHAPv2) or EAP-FAST/GTC, press OK then use the Up or Down arrow key to select TKIP or AES for the Encryption Type? and press OK.
Enter the user name and press OK.
Enter the password (Network Key), then press OK to apply your settings.
To apply the settings, select Yes.
- The machine tries to connect to the wireless network you have selected.
- If your Brother machine connected successfully
The machine's LCD displays Connected.
- If the connection failed
The machine's LCD displays Connection Fail or Connection NG.
Make sure your access point is on, and verify your Network Settings collected in Step1.
Temporarily move your machine as close as possible to the access point or router. Try starting from Step 2-2 again.
- The machine will automatically acquire the correct TCP/IP address information from your access point/router if DHCP is enabled (DHCP is normally enabled as default for most access point routers).
Once the Brother machine is joined to the network and has a valid IP address, the wireless setup is complete.
Videos
https://www.google.com/search?q=Brother+MFC+9840+CDW.+How+can+I+connect+to+wi-Fi%3F
Networking Guide
https://download.brother.com/welcome/doc002260/mfc9840_usaukasa_net_a.pdf
..
12/14/2020 12:45:44 AM •
Brother...
•
259 views • 0 helpful votes
Brother MFC 7440 N cleaning
Please consult the service manual.https://www.anyservicemanuals.com/downloads/brother-dcp-7030-dcp-7040-dcp-7045n-mfc-7320-mfc-7340-mfc-7440n-mfc-7450-mfc-7840n-mfc-7840w-sm/
5/16/2019 8:09:02 PM •
Brother...
•
120 views • 0 helpful votes
Trying to scan 35mm slides
slide scan is not an option on that model. slide scanner is an option in some models of scanners. I have a HP one as most HP scanners have the setting built into the scan firmware that lowers and higher the light to get correct scan. brother model will not do this its just normal scan setting.
Networked MFC 9840CDW resets router
It's really awesome. I love it.very interesting and meaningful post. I got some very important views in your post which are very good and applicable for me. I just wish that I'll see your another post very soon. I am waiting for that.
https://usps-tracking.co/
3/1/2018 10:39:03 PM •
Brother...
•
91 views • 0 helpful votes
BROTHER MFC210-C "UNABLE TO INIT"
good day! Unable to print 50 means'' the machine does not work due to paper jam or some sensor...mostly unable to print 50 is sensor problem. to clear the problem clean the sensor, and then the mechanical...t
Had a toner cartridge leak, have never been able
I DON'T KNOW WHAT CITY YOU LIVE IN, WHERE I LIVE AZ
HERE I CAN GO TO A GOODWILL AND BUY A COPPY SCANNER THE HOLE WORKS UNDER $25.OO THERES A POSIBILITY THAT YOU MIGHT FIND SOMETHING CLOSE TO WHAT HAVE OR BETTER..
2/5/2018 5:00:04 AM •
Brother...
•
106 views • 0 helpful votes
Not finding what you are looking for?