Brother FAX - Recent Questions, Troubleshooting & Support
Not sending fax
If Cominication error may be you are using moden in same telephone line so better way to use spliter
Telephone does not ring- call is displayed..call
Setting Ring Volume...
You can adjust the ring volume when our fax machine is idle. You can set a ring volume or press until the ring is off.
Press
to adjust the volume level. Each press of the key will sound the ringer so you will know the volume of the ringer you are selecting. When done, simply stop pushing the buttons and it will be set until you choose to adjust it again.
MFC-8710DW
I am going to assume you are using the Auto Document Feeder for when you are copying and faxing.When you lift the scanner top (As if you are placing a single document on the scanner glass) there is a small strip of glass to the left (normally) of the main scanner glass. This is the ADF scanner location. You will find that there will be two marks on this glass at the points you get lines on copied and faxed documents. Normally this is ballpoint ink that was not completely dried when fed through the ADF or Twink (Whiteout) that was not completely dry when fed through the ADF. Using rubbing alcohol or other cleaning products of similar gender clean this mess off the glass. If it does not come off it could be actual scratches on the glass which can only be fixed by replacing the glass.
Wont copy paper
The Brother Linux scanner driver works only with a superuser by default.
To use it with a normal user, you will have to make some settings.
Setting for normal users
http://welcome.solutions.brother.com...1c.html#u13.04
There is also an installer glitch when installing on 64 bit systems. I don't know if it's been fixed or not. Here is the Brother info
You'll need to scroll down a bit to find the appropriate brscan version. I think the 430 uses brscan4 but I'm not certain.
Install the scan driver.
Copy the following files under /usr/lib64/ to /usr/lib/
For brscan4 Users:
/usr/lib64/sane/libsane-brother4.so.1.0.7
/usr/lib64/sane/libsane-brother4.so
/usr/lib64/sane/libsane-brother4.so.14/ to /usr/lib/.
http://welcome.solutions.brother.com...cn.html#f00106
You'll probably need to restart after applying these fixes.
Still having Problem Then follow Us For
Brother Printer Support
Not finding what you are looking for?