Broderbund Recent Questions, Troubleshooting Help & Support

This software is not compatible with Windows Vista. I believe you can only use it with XP. 3D Home Architect Deluxe from Broderbund has been discontinued.
Only works with:
Microsoft Windows 98/Me/2000/Xp Pentium II class processor (300 MHz or higher) 96 MB RAM (128 MB Recommended)

There is a version 6.0 of this software but has bad reviews.
I found a better rated software like this one:
Home Design Architectural Series 18
This has received "TopTenREVIEWS Gold Award".

Includes:

• Cabinet Wizard™
• Texture Builder™
• PlantFinder™
• PhotoView™
• Ultimate Deck™ - Deck design software module
• Master Landscape™ - Landscape design program
• 3D Furniture Workshop™ - Custom furniture design
• FloorPlan Trace™
• Home Estimator™
• AutoFraming™
• 3D RealModel

I found this from: http://home-design-software-review.toptenreviews.com/

i have used version 4 on xp, win 7,8, and currently on 10 hope op figured it out. install in compatibility mode

I have version 4 working on win 10 by copying or installing.

Broderbund 3D Home Architect Deluxe 5 0 3D Home Landscape Designer Deluxe 5 ,,,,,,,,,

Please try re install program. Check also the minimum requirement of this program and compare it with computer system.

go google and type in ---family crest for altern if you want a family tree --type in altern ancestry-- it may require a payment and you will as much old family history to make the search good

Question edited for clarity. Question moved to Broderbund Graphics Press CTRL+ALT+DELETE Choose Task Manager That will show all instances of the program being open. You can End Task on ones that look like they shouldn't be open. Put the EXACT message in here https://www.google.com/search?q=Printmaster+18.1+is+running+in+another+program+and+to+close ..

Some potential steps for restoring a missing toolbar in The Print Shop 23 include:

• Consult the user manual or online documentation for The Print Shop 23 to find instructions on how to restore missing toolbars.
• Use the program's settings or options menu to access the toolbar settings.
• Select the page turner toolbar from the available options and enable it.
• Save the changes and exit the settings menu.

If you are unable to restore the page turner toolbar using these steps, you may want to consult the user manual or contact the manufacturer for assistance.

If you are using Calendar Creator (CC) version 10 and you want to remove the time of events from the calendar, you can do so by following these steps:

1. Open Calendar Creator and select the calendar that you want to modify.
2. Click on the "Edit" menu and choose "Global Modification".
3. In the "Global Modification" window, select the "Date/Time" tab.
4. Under "Date/Time Format", select the option for "Date only" and click "OK".
5. The time of events will now be removed from the calendar.

Keep in mind that this change will apply to all events on the calendar, so any events that have a specific time associated with them will no longer display the time on the calendar. If you only want to remove the time of certain events, you will need to modify those events individually.

contact the american bar association where you live.

Ok after days of working with this on windows 7 32 bit. I have found that having anything pluged into the speaker jacks make it crash. with the error. you that are having problem try and unplug your speakers and see if it wor

Check out the link. Normally there is a Serial number on the product and you use that to activate and get the Activation Key. https://encoresupport.freshdesk.com/support/solutions/articles/43000513397-how-do-i-activate-my-product-on-dvd-purchased-in-the-store- More here https://www.google.com/search?q=Print+Shop+online.+It+will+not+accept+my+serial+key+to+activate ..

Hi madelyn evan,

Version 6 Family Tree Maker is designed to be used with Windows 95 / 98 , therefore in order to use it in Vista you must run your program using Compatinity Mode --> Install your software--> Go to your Desktop --> Right click on the program icon--> properties-->Compatibility--> select one of the versions above
I hope this helps. If so, please take a moment to accept and rate my solution accordingly

I now have PrintShop 23.1 up and running on my Windows 8.1. This is what worked for me: 1. First, RIGHT CLICK on the Printshop icon on your desktop, select Properties, click on Compatibility, and make the selection to run the program in Compatibility Mode for Windows 8. Click Apply, then OK to exit. 2. Double click the Printshop icon on your desk top to open Printshop. If it works - great! However, if it does NOT work, it means the .NET framework required to run the program was uninstalled or corrupted by the Windows 8.1 upgrade and needs to be reinstalled, so please do the following. 3. From your Control Panel, select Programs and Features; in Programs and Features, uninstall Printshop. (You get to the Control Panel by clicking on Settings in your desktop popout taskbar, usually on the right side.) 4. Check to make sure the Microsoft .NET framework is also uninstalled. If not, attempt to uninstall. If you have recently gone to Windows 8.1, it may be partly or fully uninstalled because the 8.1 upgrade might have removed (or damaged) part of it. If it will not uninstall, don't worry! Proceed . . . 5. Follow this step even if you see no sign of the .NET framework in Programs and Features. It is almost certain that you have debris from it on your computer because this is a known problem, and Printshop will not reinstall unless the debris is removed. THEREFORE, clean your computer by using the Microsoft .NET Framework Cleanup Tool found at the following link: .NET Framework Cleanup Tool http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx 6. AFTER Printshop is once again installed, it will very likely NOT RUN unless you follow Step #1, above, to run it in Windows 8 Compatibility Mode.

The files can be transferred as long as you know where they are saved. As to opening them, just ensure that the version that you have is for Vista and you should be OK.

Family Tree Maker 2014 is available in Australia. See this site for more information:
http://www.gould.com.au/mobile/Category.aspx?id=1286

Hey Mollykay12 this should be helpful to you i guess https://www.familytreemakerhelps.com/

Included on the installation disk

It might not work if you don't have the correct drivers for it. You could try re-installing it. Or you can contact the makers: http://www.broderbund.com/c-32-printmaster.aspx

You might have to export your settings/files then re-import them back into your new program.