Briggs Garden - Page 9 - Recent Questions, Troubleshooting & Support

0helpful
1answer

Is it OK to use Valvoline 10W30 oil in a Briggs and Stratton Quantum xts 50?

That's what I use.
6/9/2018 1:53:33 PM • Briggs Garden • Answered on Jun 09, 2018
0helpful
1answer

How do you access the valves on a 12.5 L Briggs so as to adjust them?

there are two 1/4 inch bolts on the carburetor side that hold a cover on. take the spark plug out on compression stroke on top dead center and check them. if they are to far out take the head off take them out and file down to get the correct gap need for it.
6/8/2018 2:32:18 AM • Briggs Garden • Answered on Jun 08, 2018
0helpful
1answer

How do you access the valves on a 12.5 L Briggs so as to adjust them? Model 28R707 Type 1147E1

older side valve engines are checked through the side plate that has the breather hose in it they are non adjustable and if there is not enough clearance the head has to be removed , the valve removed and the end ground to the correct clearance
6/6/2018 12:22:49 AM • Briggs Garden • Answered on Jun 06, 2018
0helpful
1answer

Coil, magneto air gap on 12.5 briggs L 28R707

0.203/0.305 mm (0.008/0.012 in.)
6/5/2018 10:51:57 PM • Briggs Garden • Answered on Jun 05, 2018
0helpful
1answer

Briggs and Stratton was running fine ran out of gas in turns over but will not start

Does it have spark? Will it start if you spray starting fluid into the carb?
6/5/2018 9:29:49 PM • Briggs Garden • Answered on Jun 05, 2018
0helpful
1answer

Hi all does anyone know the torque settings on a briggs 35 classic lawnmower head bolts

No but Searspartsdirect.com will
6/1/2018 12:38:22 AM • Briggs Garden • Answered on Jun 01, 2018
0helpful
1answer

19.5 briggs Stratton stater not cranking fast enough to start ground wire is heating up. Brand new starter doing the same thing as the old one

First thing to check would be the battery terminal connections. If there is corrosion they will not deliver the amps to crank. A little corrosion will do it. They must be clean and tight. Good luck.
5/30/2018 3:49:44 PM • Briggs Garden • Answered on May 30, 2018
0helpful
1answer

Wheres the oil drain plug on masport lawn mover with briggs and straton motor

Most Briggs motors drain plugs are on the bottom they can be removed with a 3/8 ratchet extension.
5/22/2018 12:42:57 PM • Briggs Garden • Answered on May 22, 2018
0helpful
1answer
0helpful
1answer

What position should valves of a 4 stroke Briggs n Stratton lawnmower engine be if piston is at top?

2 possible positions 1-- tdc both valves in overlap position 2--- tdc both valves have tappet clearance what exactly are you asking here --valve timing check for dots on crank and cam shaft gears
5/16/2018 10:17:57 AM • Briggs Garden • Answered on May 16, 2018
0helpful
1answer

What would the gap be on 17.5 Briggs from flywheel what can I used let me know on that gap

most gaps to flywheel are .007"-.012" or the thickness of a business card
5/14/2018 5:29:47 AM • Briggs Garden • Answered on May 14, 2018
0helpful
1answer

How much oil do you put in a 8hp Briggs and Stratton

http://www.rolexlashes.com/wholesale-horse-hair-lashes-factory/ Horse Hair Lashes Wholesale Horse Hair Lashes Factory Mink Eyelashes Vendor Wholesale 3D Faux Mink Lashes Horse Hair Lashes Factory, we are manufacturer 3D faux mink with OEM/ODM service. If you wanna fuller, fluffy natural lashes,you can choose Our China top quality Faux Mink lashes. Customized box bulk order with big discount. Call us talk more details Faux Mink Lashes http://www.rolexlashes.com/wholesale-horse-hair-lashes-factory
5/9/2018 3:15:10 AM • Briggs Garden • Answered on May 09, 2018
0helpful
1answer

I have a Personal Pace lawn mower with the Briggs and Stratton engine,.Won't start. What could be the problem/ problems?

3D Mink Lashes Factory Wholesale 3D Mink Lashes Factory Mink Lashes Factory 3D Lashes Wholesale 3D Mink Lashes Factory Mink Lashes factory price, we supply best quality Natural Black , 100% mink fur and wholesale 3D Mink eyelashes factory with customized logo. 3d mink lashes Manufacturer is Natural long, Thick Criss Cross, Double Layers. If you wanna top quality China 3d mink lashes, come to shop. Wholesale 3D Mink Lashes Factory Mink Lashes Factory 3D Lashes
5/9/2018 2:05:30 AM • Briggs Garden • Answered on May 09, 2018
0helpful
1answer

My 124T02-0161-B1 Briggs and Stratton mover engine suddenly cannot be manually primed; there is no choke.

indicates a problem with the float level or blocked needle and seat hole if you require extra air flow into the ventury to suck up the fuel to start it , that indicates that the float level is set too low and there is not enough fuel in the bowl for the normal air flow to be able to suck up the fuel Would also account for the primer bulb not being able o push the fuel up to get it to start
5/7/2018 9:20:19 PM • Briggs Garden • Answered on May 07, 2018
Not finding what you are looking for?
Briggs Logo

448 questions posted

Ask a Question

Usually answered in minutes!

Top Briggs Garden Experts

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Kardoc

Level 3 Expert

7503 Answers

Stan Ford

Level 3 Expert

3131 Answers

Are you a Briggs Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...