Breville Juicers - Page 6 - Recent Questions, Troubleshooting & Support

Please check the following:

1. Make sure that the JUICE JUG is locked. Once it's not locked, it would not work.

2. Check the sticker on the juicer and verify the voltage that the juicer could receive. Based on the user manual that I have, it should be plugged in to 230/240V power. BUT AGAIN, please check the sticker first to see the voltage input.

3. Try plugging the cord into another power socket. Avoid using stripper and turn it ON.

Please let me know if you have additional information. Hope this helps and have a great day!

Go to Lowes, to the cabinet knob dept. Get a cabinet knob that matchs the holes in blade. You can always bend the screw a tiny bit if needed to fit. Put the screws into cabinet knob, and tighten. Cut the heads off and you are ready to go. They have a knob that is stainless steel, just a flat piece across the top, an 2 straight pieces that go down. I think it was $2.97. It gives good grip, and takes the blade right off.

We had a Breville juicer which we just recently used but after a few hours it stopped working. May I know if whats the problem with it. We tried to open it but we can't figure what cause the machine to stop.

WHAT'S WRONG?

Email me at [email protected] and I'll email you the PDF in the morning Oz time :)

Make sure the stainless bar running across the top is snug on the left and right groove. It has a shut off switch when not installed properly.

Fuse may be blown. Take off bottom, it is soldered to the circuit board. Unsolder and replace (I use a fuse holder) to make it easier

Hi,

In all juicers there are hidden interlock switches called interlocks for ur protection. Put all the parts properly, so that these switches sense them. then it should work.
[email protected]

nisbets.co.uk

I suggest pick it up by spout & other side of bowl & shake a little & it should release from the base unit

I found it here:

http://kitchen.manualsonline.com/manuals/mfg/breville/je900.html

I used needle nose pliers, it took a bit of patience but I got the screws out. I think I might replace them with regular screws. My juicer does not run either. Let me know if you find the problem with yours.

u can get the new pin at any local appliance shop as it is easily available for 5 dollars.

Depends on where you live they have Breville repair centers. I have problems with my juicer (not running) for Northern Virginia the closest place is NY. Check www.breville.com for a list of repair centers after warranty (not many) In California plenty of centers. Hope this helps.

http://74.6.239.67/search/cache?ei=UTF-8&p=breville+800jexl+service+manual&fr=slv8-msgr&u=www.discountjuicers.org/manuals/800jexl.pdf&w=breville+800jexl+service+manual+manuals&d=W-EkKRg5RT25&icp=1&.intl=us

Or search: JUICE FOUNTAIN
This is the manual for the Breville Juicer Model 800jexl'

Hi - You can download the manual from the link underlined in blue below:

BJE200XL
Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica