Bosch Audio Players & Recorders - Recent Questions, Troubleshooting & Support

Probably a bad solder joint or faulty control.

inside the radio you have tranformator that downgrade from 110\220v to 12v its seem like it's not working in your boombox injoy

check the display status if button pressing time it changing open close function ok but mechanical error not shows open close on display microswitch complaint

It's probably cold mine has to have a heater on when it falls below 50

Hello, Chris - You can probably locate an authorized Bosch repair center in the area where you reside by going to the Bosch home page: https://www.boschtools.com/us/en/ On the home page click or tap on the Service tab near the top of the page. That will bring you to this page: https://www.boschtools.com/us/en/service/service-center-locator/ On that page click or tap on the Service and Repair tab. Another option . . . this is the link to another authorized Bosch repair service locator: http://microsites.boschappliances.com/multibase/service-locator/ Make sure you telephone the repair services you find to verify that they work on Bosch radios. Best wishes.

Most likely the bridge rectifier in the power supply inside the radio opens, sometimes there is a fuse. If it is blown then you need to locate the reason it blew. The problem is contained in the AC circuits since the radio works OK on 12 external volts. It can be fixed.

More than likely the laser reader is burnt out.

most can be gained on internet for free or small amount ,you will need code on back or side radio

Try cleaning player with a lens cleaner c.d

What is a Bosch 360?

Disconnect the GFCI plugs