Blodgett Ovens - Answered Questions & Fixed Issues

yes it is, advise the salesman that you will stack the new oven with your existing one.

Please go to google search engine.definitely you will get the qnswer.

Door switch, gas valve, temperature control, selector switch?

Check out www.stovedecals.com - they can provide replacement stove decals for most major models and brands! They operate in Florida and manufacture the decals in the USA!

I get mr-spd sign on lcd and it makes noise what is the problem n how can I fix that plz

You can you have a lot of money.

Dirty burner nozzles is the likely cause.

http://www.blodgett.com/service-training/dfg-100-training/ go to this website for interactive video on sequence of operation and controls operation.

Model and serial numbers will help

it has been some time since I have done this but if I remember correctly, the replacement glass comes with a special tool for the trim around the glass and instructions. I suggest calling a supplier, such as Restaurant Parts and More, Heritage Parts, or PartsTown and ask if this is still the case that the tool and instructions are included with the glass.

Sorry but question appears incomplete ??

http://download.partstown.com/is-bin/intershop.static/WFS/Reedy-PartsTown-Site/-/en_US/manuals/BL_MT2136_sm.pdf this web site shows your manual and indicates that the issue is the motor needs attention. I would think that the motor has failed mechanically and is "Locked Up." The buzzing is the motor trying to run but can not as it does not move. The SP MTR indicates motor speed issue.

http://www.blodgett.com/wp-content/uploads/BCX14G-serv.pdf Try this website as it has a service manual for this oven. May help you dial in on the issue.

http://www.blodgett.com/wp-content/uploads/DFG-100-200-ES-man-english.pdf?t=1498613846 look at the trouble shooting section of this manual to start the process.

manuals are located by model number. please send that and I will help you try and find one.

http://www.blodgett.com/wp-content/uploads/CTB-man-english.pdf?t=1498613846 this is where I found your manual. give it a go.

I am not sure how you tested the capacitor but your issue is a classic one for a bad capacitor. The second problem is not very clear. With that being said, the wire could be grounding somewhere other than the ignitor. Please clarify a little more and I will help you work thru this.

I have one that won't light at all, what could the problem be?

Check to see if hood is blowing air down oven flue.

Timer is independent of cooking operation. Only switches on buzzer.