Bissell Vacuums - Page 8 - Recent Questions, Troubleshooting & Support

https://searchmanuals.net/search7/?keyword=%2Bowners+%2Bmanual&gclid=Cj0KCQiAzePjBRCRARIsAGkrSm4hwGgMJ4loxVKnk_d9loNSyMnzjcinCTYKx6DBNotuk4W7EdNURhoaAggqEALw_wcB

What do you mean by belt size? U mean they type it takes?

I have the same problem... seems to be because of a bad, or worn, rubber gasket.

My Does not spray solution??? Can you please, help me. I'm ready to go and it is'nt.

That part go's inside the handle, by the hot water tank (can't see this tank it is inside the handle), Leave the hot water power switch off, until it is put back!

There are a few models to select from to get yours but here is a link to the website to download (free) a service manual and troubleshooting guide, the really thorough kind, for your resolve... http://bissell.manualnguide.com/manual-bissell-proheat-2x

Check that the tank and the nozzle cover are properly installed. If the motor is running, it should be sucking. If it's not, there is a seal that isn't sealing

http://www.mictaservice.com/_vacuums/q3985004-power_button_lights_up_but

First remove the hose and place your hand instead of the hose then start tha machine. If your hand is suck by the machine only your hose is the problem. Clean your hose by filling it with water and see what will come out at the other end of the hose. If water and some dirt comes out, wait until pure water only comes out. If water and debris not coming out of the hose, use a flexible wire or rod to push the debris blocking the hose.

Something is bassackwards. Try to disassemble and reassemble correctly. Or take it to be serviced.

I would sugguest you go for a screening

the most likely perhaps one of the brush or both have a problem

Return it for a new one that works. You paid for new one that worked and that is what you should get.

I had this same problem and here is what solved it for me. On a previous cleaning session, my wife decided to take the two front screws out of the clear plastic shroud that covers the brushes in order to clean behind it. Upon re-installation, she did not secure the top part correctly. On the end near the water tank, there are two tiny half-moon tabs that absolutely need to be seated in their opposing slots in the chassis.This allows for a good seal which enables the machine to **** up the water. It also keeps the front cover level and from dragging on the carpet when pushing it forward. Both were problems I was experiencing. Hope this helps!

There is a solenoid that activates when you press the trigger and allows water to flow. If it isn't stopping, you most likely have a bad solenoid. Take it to your local vac shop for repair.

Here is a link: https://www.bissell.com/support/helpful-resources/how-to-videos

Bissell web site has several manuals: https://bissellmedia.azureedge.net/-/media/site-us/documents/user-guides/86t3/bissell_user_guide_big_green_carpet_cleaning_machine_86t3.pdf?la=en&modified=20151201085908&cdnv=2

most possible or a wire or the suction motor have a damage. take it in a repair shop